Bo-Katan Kryze Full (Realistic Style) Finished Armour Star Wars (The Mandalorian)
This is a listing for all ‘Finished’ hard parts’ of Bo-Katan (Realistic Style) armour including with or without the helmet.
You will need to source the the soft parts (under suit, boots, gloves, belt etc.) from a company who specialises in them.
3D printed, hand built, filled, sanded, chest and back armour are reinforced with fibre glass so its super strong and super light weight for trooping! Primed, hand painted and weathered by me. Armour can come clean or weathered, or for any custom paint job you require, please add a note to your order.
We will email you for your whole body measurements and we scale to perfectly fit you! Please have a measuring tape ready.
We designed this full armour set after Bo-Katans first amazing Live action debut in The Mandalorian. Every single detail has been carefully researched and crafted to be both highly accurate to the show as well as comfortable to wear.
Gauntlets
The gauntlets are both joined by 6 x (4mm x 8mm cylindrical neodymium) magnets for ease of dressing. The left hand gauntlet has a hollow whistling birds and seperate keypad We can add LED’s and electronics and also snaps on and off with 3 x magnets so you can change the battery.
The right hand gauntlet is extra special as it has a fully working spring loaded wrist blade! You will need the following two springs:
The jet pack is hollow with a door on the inside so you can add thruster lights and soundboard (not included at this time).
Comes with 2 x The Westar 35 Blaster Pistols!
Fully articulated rangefinder on our already popular and highly accurate Bo-Katan helmet.
Exceptional detail on all armour pieces!
Parts included in these files are:
HELMET
ARMOUR
• Abdomen
• Back Plate
• Chest Plate
• Belt
• Collar Left/Right
• Groin Plate
• Headband
• Optional Jetpack
• Knee Left/Right
• Left Forearm - Inner, Outer, Whistling Birds, Keypad
• Right Forearm - Inner, Outer + Articulated Wrist blade
• Hand Plates Left/Right
• Shoulder - Left, Right
• Shins Left/Right
• Thighs Left/Right
WESTAR 35 BLASTER PISTOL ( x2 )
We are extremely proud of this Armour!
SIZING
Helmet - This helmet fits most adult female heads. If you believe you have a head larger than the average Uk female of 55.2 cm circumference (measured at the brow), then please add a note to your order to print larger.
Helmet is not padded so you have the freedom to add your own and we can recommend where to find.
Armour - We will contact you by email with all the body measurements needed and create an avatar and scale all parts individually for your personal size.
MATERIAL
PLA which is an environmentally friendly plant based plastic. Reinforced on the inside with fibre glass.
SHIPPING
Sent carefully and well packaged 8kg (£1000 Insurance).
UK Shipping £50 - Royal Mail Special Delivery 1-2 days
Europe Shipping £60 - Royal Mail International Tracked 3 days
Worldwide Shipping £102 - Global Priority Tracked 4 days
Canada Shipping £90 - Global Priority Tracked 4 days
USA Shipping £120 + 10% Tarrifs (calculated at checkout) - Global Priority Tracked 4 days
LEGAL
• This is not an official licensed product and is considered ‘Fan Art’. The copyright of this product does not belong to the seller.
• Buyers are responsible for any Customs and import taxes
• Due to the custom nature of the work, print and dispatch times may vary and are estimates only.
• Shipping delays can happen. Postage has been affected everywhere by the global pandemic, please understand that we cannot control everything but try our best to get your order to you as fast as possible
Bo-Katan Kryze Full (Realistic Style) Finished Armour Star Wars (The Mandalorian)
This is a listing for all ‘Finished’ hard parts’ of Bo-Katan (Realistic Style) armour including with or without the helmet.
You will need to source the the soft parts (under suit, boots, gloves, belt etc.) from a company who specialises in them.
3D printed, hand built, filled, sanded, chest and back armour are reinforced with fibre glass so its super strong and super light weight for trooping! Primed, hand painted and weathered by me. Armour can come clean or weathered, or for any custom paint job you require, please add a note to your order.
We will email you for your whole body measurements and we scale to perfectly fit you! Please have a measuring tape ready.
We designed this full armour set after Bo-Katans first amazing Live action debut in The Mandalorian. Every single detail has been carefully researched and crafted to be both highly accurate to the show as well as comfortable to wear.
Gauntlets
The gauntlets are both joined by 6 x (4mm x 8mm cylindrical neodymium) magnets for ease of dressing. The left hand gauntlet has a hollow whistling birds and seperate keypad We can add LED’s and electronics and also snaps on and off with 3 x magnets so you can change the battery.
The right hand gauntlet is extra special as it has a fully working spring loaded wrist blade! You will need the following two springs:
The jet pack is hollow with a door on the inside so you can add thruster lights and soundboard (not included at this time).
Comes with 2 x The Westar 35 Blaster Pistols!
Fully articulated rangefinder on our already popular and highly accurate Bo-Katan helmet.
Exceptional detail on all armour pieces!
Parts included in these files are:
HELMET
ARMOUR
• Abdomen
• Back Plate
• Chest Plate
• Belt
• Collar Left/Right
• Groin Plate
• Headband
• Optional Jetpack
• Knee Left/Right
• Left Forearm - Inner, Outer, Whistling Birds, Keypad
• Right Forearm - Inner, Outer + Articulated Wrist blade
• Hand Plates Left/Right
• Shoulder - Left, Right
• Shins Left/Right
• Thighs Left/Right
WESTAR 35 BLASTER PISTOL ( x2 )
We are extremely proud of this Armour!
SIZING
Helmet - This helmet fits most adult female heads. If you believe you have a head larger than the average Uk female of 55.2 cm circumference (measured at the brow), then please add a note to your order to print larger.
Helmet is not padded so you have the freedom to add your own and we can recommend where to find.
Armour - We will contact you by email with all the body measurements needed and create an avatar and scale all parts individually for your personal size.
MATERIAL
PLA which is an environmentally friendly plant based plastic. Reinforced on the inside with fibre glass.
SHIPPING
Sent carefully and well packaged 8kg (£1000 Insurance).
UK Shipping £50 - Royal Mail Special Delivery 1-2 days
Europe Shipping £60 - Royal Mail International Tracked 3 days
Worldwide Shipping £102 - Global Priority Tracked 4 days
Canada Shipping £90 - Global Priority Tracked 4 days
USA Shipping £120 + 10% Tarrifs (calculated at checkout) - Global Priority Tracked 4 days
LEGAL
• This is not an official licensed product and is considered ‘Fan Art’. The copyright of this product does not belong to the seller.
• Buyers are responsible for any Customs and import taxes
• Due to the custom nature of the work, print and dispatch times may vary and are estimates only.
• Shipping delays can happen. Postage has been affected everywhere by the global pandemic, please understand that we cannot control everything but try our best to get your order to you as fast as possible
Image 1 of 20
Image 2 of 20
Image 3 of 20
Image 4 of 20
Image 5 of 20
Image 6 of 20
Image 7 of 20
Image 8 of 20
Image 9 of 20
Image 10 of 20
Image 11 of 20
Image 12 of 20
Image 13 of 20
Image 14 of 20
Image 15 of 20
Image 16 of 20
Image 17 of 20
Image 18 of 20
Image 19 of 20
Image 20 of 20
