Bo-Katan Kryze Female Mando Articulated Wrist Blade Gauntlets Only 3D Print Files (The Mandalorian)
PLEASE NOTE: This is a digital 3D print file, not a physical prop.
Gauntlets of the Rightful ruler of Mandalore herself; Bo Katan of Clan Kryze.
No expense has been spared for the accuracy and detail of these files.
The gauntlets are both joined by 6 x (4mm x 8mm cylindrical neodymium) magnets for ease of dressing. The left hand gauntlet has a hollow whistling birds and seperate keypad for you to add your own LED’s and electronics and also snaps on and off with 3 x magnets so you can change the battery.
The right hand gauntlet is extra special as it has a fully working spring loaded wrist blade! You will need the following two springs:
• 100mm free length, 50mm compressed, 8mm OD (Outer Diameter), 0.8mm wire diameter spring x 1 for the main mechanism .
• And a smaller 10mm free length, 5mm compressed, 3mm OD, 0.8mm wire diameter spring x 1 for the release button. Mechanism instructions included.
All smaller Antennas are seperate for higher detail printing.
You will ned 15 x (4mm x 8mm cylindrical neodymium) magnets in total.
Parts included are:
Left Forearm
• Inner, Outer,
• Whistling Birds
• Keypad
Right Forearm
• Inner, Outer
• Antenna 1, 2, 3,
• Blade
• Blade Block
• Blade Button
• Cover
We are very proud of these gauntlets!
You will Need:
For the Gauntlets, you will need the following two springs:
• 100mm free length, 50mm compressed, 8mm OD (Outer Diameter), 0.8mm wire diameter spring x 1 for the main mechanism .
• And a smaller 10mm free length, 5mm compressed, 3mm OD, 0.8mm wire diameter spring x 1 for the release button.
Please only use for personal printing.
If you print or build regularly, joining the workshop Patreon makes everything easier!
Patreon.com/jedhaworkshop
License Type: Personal Use
This purchase grants you a personal use license for the included 3D print files.
You may:
• 3D print the files for personal use
• Build, display, and enjoy the finished prop
Restrictions
The following are not permitted:
• Redistribution or sharing of the STL files in any form
• Resale of the digital files
• Modification of the files for resale or redistribution
• Selling 3D printed kits or finished props made from these files
• Casting or vacuum forming for commercial reproduction
Legal Notice
These models are fan-made creations inspired by existing fictional universes and are not official licensed products.
All designs are original digital works created by Jedha Workshop..
If you’d like access to future models, early releases, and the workshop community, you can join the Jedha Workshop Patreon here:
Patreon.com/jedhaworkshop
Bo-Katan Kryze Female Mando Articulated Wrist Blade Gauntlets Only 3D Print Files (The Mandalorian)
PLEASE NOTE: This is a digital 3D print file, not a physical prop.
Gauntlets of the Rightful ruler of Mandalore herself; Bo Katan of Clan Kryze.
No expense has been spared for the accuracy and detail of these files.
The gauntlets are both joined by 6 x (4mm x 8mm cylindrical neodymium) magnets for ease of dressing. The left hand gauntlet has a hollow whistling birds and seperate keypad for you to add your own LED’s and electronics and also snaps on and off with 3 x magnets so you can change the battery.
The right hand gauntlet is extra special as it has a fully working spring loaded wrist blade! You will need the following two springs:
• 100mm free length, 50mm compressed, 8mm OD (Outer Diameter), 0.8mm wire diameter spring x 1 for the main mechanism .
• And a smaller 10mm free length, 5mm compressed, 3mm OD, 0.8mm wire diameter spring x 1 for the release button. Mechanism instructions included.
All smaller Antennas are seperate for higher detail printing.
You will ned 15 x (4mm x 8mm cylindrical neodymium) magnets in total.
Parts included are:
Left Forearm
• Inner, Outer,
• Whistling Birds
• Keypad
Right Forearm
• Inner, Outer
• Antenna 1, 2, 3,
• Blade
• Blade Block
• Blade Button
• Cover
We are very proud of these gauntlets!
You will Need:
For the Gauntlets, you will need the following two springs:
• 100mm free length, 50mm compressed, 8mm OD (Outer Diameter), 0.8mm wire diameter spring x 1 for the main mechanism .
• And a smaller 10mm free length, 5mm compressed, 3mm OD, 0.8mm wire diameter spring x 1 for the release button.
Please only use for personal printing.
If you print or build regularly, joining the workshop Patreon makes everything easier!
Patreon.com/jedhaworkshop
License Type: Personal Use
This purchase grants you a personal use license for the included 3D print files.
You may:
• 3D print the files for personal use
• Build, display, and enjoy the finished prop
Restrictions
The following are not permitted:
• Redistribution or sharing of the STL files in any form
• Resale of the digital files
• Modification of the files for resale or redistribution
• Selling 3D printed kits or finished props made from these files
• Casting or vacuum forming for commercial reproduction
Legal Notice
These models are fan-made creations inspired by existing fictional universes and are not official licensed products.
All designs are original digital works created by Jedha Workshop..
If you’d like access to future models, early releases, and the workshop community, you can join the Jedha Workshop Patreon here:
Patreon.com/jedhaworkshop
Image 1 of 12
Image 2 of 12
Image 3 of 12
Image 4 of 12
Image 5 of 12
Image 6 of 12
Image 7 of 12
Image 8 of 12
Image 9 of 12
Image 10 of 12
Image 11 of 12
Image 12 of 12
