Candyman Full Cosplay kit 3D Print Files (Candyman 1992)
*PLEASE NOTE - These are 3D Print files, not a physical prop.
Included in this pack is: Chest Guts Prosthetic, Bloody Stump Hook and Bumble Bee!
£50 individual value — SAVE 30%
“It was always you, Helen. It was always you.”
Chest Guts Prosthetic Description
Technically, to cosplay as Candyman; you could just print our Bloody Stump Hook and wear a big coat. But why do that when you can have his entire CHEST GUTS? This prop has been meticulously modelled as a high-detail recreation of the actual screen used prosthetic worn by Tony Todd in Candyman (1992).
We have hollowed out the interior side as much as possible for comfort whilst not disturbing the detail of the front and it still be 3d printable.
At 100% scale, the whole chest piece measure 480mm tall x 344mm wide and is roughly 25mm deep at it’s thinnest point and 125mm deep at it’s thickest. We have separated it into smaller printable chunks of either two halves (upper and lower) or four quadrants with a joining biscuit.
Add heavy duty velcro to the inside or supporting straps and join with E6000 glue or press studs.
The only question that remains is: Do you dare say his name five times?
The chest piece is highly accurate to Candyman however, being standard human anatomy, you could also of course use it as a zombie.
Included in these files are:
• Chest Guts (Full)
• Chest Guts (2 Halves)
• Chest Guts (4 Parts)
• Joining Biscuit
We are extremely proud of this prop!
Bloody Stump Hook Description
This is one of my all time favourites! Here we have the infamous Bloody Stump Hook from one of the most original horror icons - and one of the most genuinely scary horror movies in film history; Candyman (1992).
This model has been lovingly crafted after the actual original screen used prop worn by Tony Todd. It comes with a printable rod handle that can be inserted inside the hollow stump for, y’know… slashing, or completely removable if you just want to wear it on your hand. The stump itself has been fully hollowed and shaped around the latter end of a closed fist to try and minimise oversized looking scaling. The two nails are separate with a gluable base. The point of the hook has been deliberately blunted but be careful regardless!
The only question that remains is: Do you dare say his name five times?
Included in these files are:
• Bloody Stump & Hook
• Handle
• Nails (Let & Right)
We are extremely proud of this prop
Bumble Bee Description
When modelling our highly-detailed Candyman Chest Guts prosthetic, we wanted to add the option of including bees on your cosplay. As bees are delicate little creatures, we thought we’d bump up the thickness of their wings, legs and antennae to make them 3d printable. So now you can print hundreds, with or without legs/wings and glue them on!
At 100% scale the bee measures 25mm long.
The wings are separate to print in clear resin/pla and all accessories have joining pins.
If you’re not into Candyman, it’s also just a pretty rad Bumble Bee model! It’s high poly (650,000 triangles) so you could always scale it up and have a pet bumble bee :-)
If you are creating a full Candyman cosplay, the only question that remains is:
Do you dare say his name five times?
Included in these files are:
• Bumble Bee Main Body
• Antennae (Left & Right)
• Legs (FL, FR, BL, BR)
• Wings (Keft & Right)
We are extremely proud of this prop!
Please only use for personal printing.
If you print or build regularly or own a shop, joining the workshop Patreon makes everything easier!
Patreon.com/jedhaworkshop
License Type: Personal Use
This purchase grants you a personal use license for the included 3D print files.
You may:
• 3D print the files for personal use
• Build, display, and enjoy the finished prop
Restrictions
The following are not permitted:
• Redistribution or sharing of the STL files in any form
• Resale of the digital files
• Modification of the files for resale or redistribution.
• Selling 3D printed kits or finished props made from these files
• Casting or vacuum forming for commercial reproduction.
Legal Notice
These models are fan-made creations inspired by existing fictional universes and are not official licensed products.
All designs are original digital works created by Jedha Workshop..
If you’d like access to future models, early releases, commercial rights and the workshop community, you can join the Jedha Workshop Patreon here:
Patreon.com/jedhaworkshop
Candyman Full Cosplay kit 3D Print Files (Candyman 1992)
*PLEASE NOTE - These are 3D Print files, not a physical prop.
Included in this pack is: Chest Guts Prosthetic, Bloody Stump Hook and Bumble Bee!
£50 individual value — SAVE 30%
“It was always you, Helen. It was always you.”
Chest Guts Prosthetic Description
Technically, to cosplay as Candyman; you could just print our Bloody Stump Hook and wear a big coat. But why do that when you can have his entire CHEST GUTS? This prop has been meticulously modelled as a high-detail recreation of the actual screen used prosthetic worn by Tony Todd in Candyman (1992).
We have hollowed out the interior side as much as possible for comfort whilst not disturbing the detail of the front and it still be 3d printable.
At 100% scale, the whole chest piece measure 480mm tall x 344mm wide and is roughly 25mm deep at it’s thinnest point and 125mm deep at it’s thickest. We have separated it into smaller printable chunks of either two halves (upper and lower) or four quadrants with a joining biscuit.
Add heavy duty velcro to the inside or supporting straps and join with E6000 glue or press studs.
The only question that remains is: Do you dare say his name five times?
The chest piece is highly accurate to Candyman however, being standard human anatomy, you could also of course use it as a zombie.
Included in these files are:
• Chest Guts (Full)
• Chest Guts (2 Halves)
• Chest Guts (4 Parts)
• Joining Biscuit
We are extremely proud of this prop!
Bloody Stump Hook Description
This is one of my all time favourites! Here we have the infamous Bloody Stump Hook from one of the most original horror icons - and one of the most genuinely scary horror movies in film history; Candyman (1992).
This model has been lovingly crafted after the actual original screen used prop worn by Tony Todd. It comes with a printable rod handle that can be inserted inside the hollow stump for, y’know… slashing, or completely removable if you just want to wear it on your hand. The stump itself has been fully hollowed and shaped around the latter end of a closed fist to try and minimise oversized looking scaling. The two nails are separate with a gluable base. The point of the hook has been deliberately blunted but be careful regardless!
The only question that remains is: Do you dare say his name five times?
Included in these files are:
• Bloody Stump & Hook
• Handle
• Nails (Let & Right)
We are extremely proud of this prop
Bumble Bee Description
When modelling our highly-detailed Candyman Chest Guts prosthetic, we wanted to add the option of including bees on your cosplay. As bees are delicate little creatures, we thought we’d bump up the thickness of their wings, legs and antennae to make them 3d printable. So now you can print hundreds, with or without legs/wings and glue them on!
At 100% scale the bee measures 25mm long.
The wings are separate to print in clear resin/pla and all accessories have joining pins.
If you’re not into Candyman, it’s also just a pretty rad Bumble Bee model! It’s high poly (650,000 triangles) so you could always scale it up and have a pet bumble bee :-)
If you are creating a full Candyman cosplay, the only question that remains is:
Do you dare say his name five times?
Included in these files are:
• Bumble Bee Main Body
• Antennae (Left & Right)
• Legs (FL, FR, BL, BR)
• Wings (Keft & Right)
We are extremely proud of this prop!
Please only use for personal printing.
If you print or build regularly or own a shop, joining the workshop Patreon makes everything easier!
Patreon.com/jedhaworkshop
License Type: Personal Use
This purchase grants you a personal use license for the included 3D print files.
You may:
• 3D print the files for personal use
• Build, display, and enjoy the finished prop
Restrictions
The following are not permitted:
• Redistribution or sharing of the STL files in any form
• Resale of the digital files
• Modification of the files for resale or redistribution.
• Selling 3D printed kits or finished props made from these files
• Casting or vacuum forming for commercial reproduction.
Legal Notice
These models are fan-made creations inspired by existing fictional universes and are not official licensed products.
All designs are original digital works created by Jedha Workshop..
If you’d like access to future models, early releases, commercial rights and the workshop community, you can join the Jedha Workshop Patreon here:
Patreon.com/jedhaworkshop
Image 1 of 43
Image 2 of 43
Image 3 of 43
Image 4 of 43
Image 5 of 43
Image 6 of 43
Image 7 of 43
Image 8 of 43
Image 9 of 43
Image 10 of 43
Image 11 of 43
Image 12 of 43
Image 13 of 43
Image 14 of 43
Image 15 of 43
Image 16 of 43
Image 17 of 43
Image 18 of 43
Image 19 of 43
Image 20 of 43
Image 21 of 43
Image 22 of 43
Image 23 of 43
Image 24 of 43
Image 25 of 43
Image 26 of 43
Image 27 of 43
Image 28 of 43
Image 29 of 43
Image 30 of 43
Image 31 of 43
Image 32 of 43
Image 33 of 43
Image 34 of 43
Image 35 of 43
Image 36 of 43
Image 37 of 43
Image 38 of 43
Image 39 of 43
Image 40 of 43
Image 41 of 43
Image 42 of 43
Image 43 of 43
