Clone Commander Short Range Optical Sensor (Hollow for Electronics) (Revenge of the Sith)
*Please Note - This is a Digital 3d print file, not a physical prop.
This is our Camera Sensor Model or ‘Short Range Optical Sensor’ from the Clone Commander Accessory set which mounts onto a Clone trooper Helmet and is used for low-light/IR enhancement pick up, targeting assistance and battle-feed scanning.
As well as the solid part, it is hollowed out and with removable cap to add your own electronics to.
The aperture hole of the cap comes in a range of sizes: 6mm, 8mm, 10mm, 12mm, 14mm and 16mm diameters.
Add your own real world electronic camera set up, light or laser!
Parts received are:
• Camera Sensor Solid
• Camera Sensor Main body
• Cap (x 6) 6mm-16mm sizes.
We are very proud of this model!
Please only use for personal printing.
If you print or build regularly, joining the workshop Patreon makes everything easier!
Patreon.com/jedhaworkshop
License Type: Personal Use
This purchase grants you a personal use license for the included 3D print files.
You may:
• 3D print the files for personal use
• Build, display, and enjoy the finished prop
Restrictions
The following are not permitted:
• Redistribution or sharing of the STL files in any form
• Resale of the digital files
• Modification of the files for resale or redistribution
• Selling 3D printed kits or finished props made from these files
• Casting or vacuum forming for commercial reproduction
Legal Notice
These models are fan-made creations inspired by existing fictional universes and are not official licensed products.
All designs are original digital works created by Jedha Workshop.
If you’d like access to future models, early releases, and the workshop community, you can join the Jedha Workshop Patreon here:
Patreon.com/jedhaworkshop
Clone Commander Short Range Optical Sensor (Hollow for Electronics) (Revenge of the Sith)
*Please Note - This is a Digital 3d print file, not a physical prop.
This is our Camera Sensor Model or ‘Short Range Optical Sensor’ from the Clone Commander Accessory set which mounts onto a Clone trooper Helmet and is used for low-light/IR enhancement pick up, targeting assistance and battle-feed scanning.
As well as the solid part, it is hollowed out and with removable cap to add your own electronics to.
The aperture hole of the cap comes in a range of sizes: 6mm, 8mm, 10mm, 12mm, 14mm and 16mm diameters.
Add your own real world electronic camera set up, light or laser!
Parts received are:
• Camera Sensor Solid
• Camera Sensor Main body
• Cap (x 6) 6mm-16mm sizes.
We are very proud of this model!
Please only use for personal printing.
If you print or build regularly, joining the workshop Patreon makes everything easier!
Patreon.com/jedhaworkshop
License Type: Personal Use
This purchase grants you a personal use license for the included 3D print files.
You may:
• 3D print the files for personal use
• Build, display, and enjoy the finished prop
Restrictions
The following are not permitted:
• Redistribution or sharing of the STL files in any form
• Resale of the digital files
• Modification of the files for resale or redistribution
• Selling 3D printed kits or finished props made from these files
• Casting or vacuum forming for commercial reproduction
Legal Notice
These models are fan-made creations inspired by existing fictional universes and are not official licensed products.
All designs are original digital works created by Jedha Workshop.
If you’d like access to future models, early releases, and the workshop community, you can join the Jedha Workshop Patreon here:
Patreon.com/jedhaworkshop
Image 1 of 10
Image 2 of 10
Image 3 of 10
Image 4 of 10
Image 5 of 10
Image 6 of 10
Image 7 of 10
Image 8 of 10
Image 9 of 10
Image 10 of 10
