Gaffi Stick STL Bundle - Tusken Raider A New Hope, Boba Fett Hunter, Tusken Warrior Variant
PLEASE NOTE: These are digital 3D print files, not physical helmets.
We’ve put our very popular three Gaffi stick designs together in one pack! Here you’ll find the original A New Hope Tusken Raider Gaffi Stick, Boba Fetts Hunter Variant and the Tusken Warriors Variant from The Book of Boba Fett.
Each one is a very different design with unique ‘pineapple heads’, handles and mace -meticulously researched for screen accuracy, simple to print, build and cosplay in!
Individual Price £27
Bundle Price £17
Save £10
All parts are separate for easier printing and building. Pineapple heads have been split in half for support free printing and cleaner finish. The rods have been designed hollow to add wooden dowel down the centre for added strength (sizes specific below).
Included in the pack is:
Gaffi Stick - Original Tusken Raider Style 3D Files (A New Hope)
It has been designed for a 1” (2.54cm) wooden dowel to be threaded through the sections to give strength.
Parts included are:
• Pineapple Head Top
• Pineapple Head Bottom
• Wooden upper section x 2 parts
• Handle
• Spear Top
• Mace
• Spear Lower
• You will need a:
• 1” (2.54cm) diameter wooden dowel.
SIZE
This is a Life Size 1:1 Scale prop. Printed at 100% it is approx 1.34m long.
We are very proud of this weapon!
Gaffi Stick - Boba Fett's Hunter Style 3D Files (The Book of Boba Fett)
It has been designed for a long 1” (2.54cm) wooden dowel to be threaded through the upper sections, including a small piece for the head to give strength, and a 1/2” (1.27cm) dowel for the lower spear and mace.
Included in this pack are:
• Point
• Pineapple Top
• Pineapple Bottom
• Bend
• Handle (Print x 3)
•Handle Link (Print x 2)
• Spear Link
• Spear Top
• Spear Bottom
• Mace
• You will need a:
• 1” (2.54cm) diameter wooden dowel approx 38cm long
• 1” (2.54cm) diameter wooden dowel approx 5.5cmcm long
• 1/2” (1.27cm) dowel aprox 71cm long
SIZE
This is a Life Size 1:1 Scale prop. Printed at 100% it is approx 1.45m long.
We are very proud of this weapon!
Gaffi Stick - Tusken Warrior 3D Files (The Book 0f Boba Fett)
It has been designed for a long 1” (2.54cm) wooden dowel to be threaded through the upper sections, including a small piece for the head to give strength, and the mace has its own male/female glue point.
Included in this pack are:
• Pineapple Top
• Pineapple Bottom
• Bend
• Top Handle
• Main Shaft (available split into two for smaller printers)
• Mace
• You will need a:
• 1” (2.54cm) diameter wooden dowel approx 80cm long
• 1” (2.54cm) diameter wooden dowel approx 12cm long
SIZE
This is a Life Size 1:1 Scale prop. Printed at 100% it is approx 1.45m long.
We are very proud of this weapon!
Files will be available for immediate download from this site upon purchase and available for 5 days after.
For early models before the public, cheaper, regular and with commercial license, consider joining our Patreon.
www.patreon.com/jedhaworkshop
LEGAL
Fan Art Notice
These models are fan-made creations inspired by characters and designs from existing universes.
They are not official licensed products and are not affiliated with or endorsed by any film studio, game developer, or rights holder.
All models are original 3D artwork created by Jedha Workshop for personal use and prop-building purposes.
License – Personal Use
Purchase of this file grants the buyer a personal-use license only.
You may:
• 3D print the model for personal use
• Build and display the finished prop
You may not:
• Sell or distribute the STL files
• Share or upload the files to other platforms
• Sell printed copies without a valid commercial license
Gaffi Stick STL Bundle - Tusken Raider A New Hope, Boba Fett Hunter, Tusken Warrior Variant
PLEASE NOTE: These are digital 3D print files, not physical helmets.
We’ve put our very popular three Gaffi stick designs together in one pack! Here you’ll find the original A New Hope Tusken Raider Gaffi Stick, Boba Fetts Hunter Variant and the Tusken Warriors Variant from The Book of Boba Fett.
Each one is a very different design with unique ‘pineapple heads’, handles and mace -meticulously researched for screen accuracy, simple to print, build and cosplay in!
Individual Price £27
Bundle Price £17
Save £10
All parts are separate for easier printing and building. Pineapple heads have been split in half for support free printing and cleaner finish. The rods have been designed hollow to add wooden dowel down the centre for added strength (sizes specific below).
Included in the pack is:
Gaffi Stick - Original Tusken Raider Style 3D Files (A New Hope)
It has been designed for a 1” (2.54cm) wooden dowel to be threaded through the sections to give strength.
Parts included are:
• Pineapple Head Top
• Pineapple Head Bottom
• Wooden upper section x 2 parts
• Handle
• Spear Top
• Mace
• Spear Lower
• You will need a:
• 1” (2.54cm) diameter wooden dowel.
SIZE
This is a Life Size 1:1 Scale prop. Printed at 100% it is approx 1.34m long.
We are very proud of this weapon!
Gaffi Stick - Boba Fett's Hunter Style 3D Files (The Book of Boba Fett)
It has been designed for a long 1” (2.54cm) wooden dowel to be threaded through the upper sections, including a small piece for the head to give strength, and a 1/2” (1.27cm) dowel for the lower spear and mace.
Included in this pack are:
• Point
• Pineapple Top
• Pineapple Bottom
• Bend
• Handle (Print x 3)
•Handle Link (Print x 2)
• Spear Link
• Spear Top
• Spear Bottom
• Mace
• You will need a:
• 1” (2.54cm) diameter wooden dowel approx 38cm long
• 1” (2.54cm) diameter wooden dowel approx 5.5cmcm long
• 1/2” (1.27cm) dowel aprox 71cm long
SIZE
This is a Life Size 1:1 Scale prop. Printed at 100% it is approx 1.45m long.
We are very proud of this weapon!
Gaffi Stick - Tusken Warrior 3D Files (The Book 0f Boba Fett)
It has been designed for a long 1” (2.54cm) wooden dowel to be threaded through the upper sections, including a small piece for the head to give strength, and the mace has its own male/female glue point.
Included in this pack are:
• Pineapple Top
• Pineapple Bottom
• Bend
• Top Handle
• Main Shaft (available split into two for smaller printers)
• Mace
• You will need a:
• 1” (2.54cm) diameter wooden dowel approx 80cm long
• 1” (2.54cm) diameter wooden dowel approx 12cm long
SIZE
This is a Life Size 1:1 Scale prop. Printed at 100% it is approx 1.45m long.
We are very proud of this weapon!
Files will be available for immediate download from this site upon purchase and available for 5 days after.
For early models before the public, cheaper, regular and with commercial license, consider joining our Patreon.
www.patreon.com/jedhaworkshop
LEGAL
Fan Art Notice
These models are fan-made creations inspired by characters and designs from existing universes.
They are not official licensed products and are not affiliated with or endorsed by any film studio, game developer, or rights holder.
All models are original 3D artwork created by Jedha Workshop for personal use and prop-building purposes.
License – Personal Use
Purchase of this file grants the buyer a personal-use license only.
You may:
• 3D print the model for personal use
• Build and display the finished prop
You may not:
• Sell or distribute the STL files
• Share or upload the files to other platforms
• Sell printed copies without a valid commercial license
Image 1 of 29
Image 2 of 29
Image 3 of 29
Image 4 of 29
Image 5 of 29
Image 6 of 29
Image 7 of 29
Image 8 of 29
Image 9 of 29
Image 10 of 29
Image 11 of 29
Image 12 of 29
Image 13 of 29
Image 14 of 29
Image 15 of 29
Image 16 of 29
Image 17 of 29
Image 18 of 29
Image 19 of 29
Image 20 of 29
Image 21 of 29
Image 22 of 29
Image 23 of 29
Image 24 of 29
Image 25 of 29
Image 26 of 29
Image 27 of 29
Image 28 of 29
Image 29 of 29
