Imperial Worker Helmer 3D Print Files (Jedi Knight II: Jedi Outcast
*PLEASE NOTE - These are 3D Print files, not a physical helmet.
Imperial workers were engineers used by the Imperial Remnant that wore hazardous environment suits as the conditions they had to work in were often dangerous. Primarily used in operating machinery and conducting repairs, therefor were not armoured, though their toughened suits could absorb mild blast damage, and were armed with a DH-17 blaster for personal protection. Many of them were slain by Kyle Katarn when he encountered them on his adventures.
Finding good reference material to help design this helmet was sparse to say the least! Just a few pixelated screenshots from the early 00’s. And upon drawing up our plans, I genuinely thought this would be a fairly easy build. As we progressed and figured out how all the shapes work with each other however, it actually became clear how complex and what a lovely design this helmet really is.
We’ve hollowed out the mohawk and added a hole through to the helmet underneath so that you can run wiring/LED’s to add a torch and can print the front glass in clear plastic/resin. There is also a printable mesh to add to the torch.
Included in this pack is the helmet as a whole one part model - with and without visor, in both 100% Scale and 1/6th Scale for figure makers, as well of course as a version carefully separated for higher detail printing and an easier paint and build!
The visor also comes separated as naturally curved to cast or vacuum form from as well as a flat printable template.
Included in these files are:
Imperial Worker Helmer
• Ear Discs (Left & Right)
• Ears (Left & Right)
• Lower Pipes (Left & Right)
• Main Helmet
• Mohawk Torch Glass
• Mohawk Torch
• Mouth Assembly
• Torch Mesh
• Upper Pipes (Left & Right)
• Visor (curved)
• Visor (Flat Template)
We are extremely proud of this Helmet!
Please only use for personal printing.
If you print or build regularly or own a shop, joining the workshop Patreon makes everything easier!
Patreon.com/jedhaworkshop
License Type: Personal Use
This purchase grants you a personal use license for the included 3D print files.
You may:
• 3D print the files for personal use
• Build, display, and enjoy the finished prop
Restrictions
The following are not permitted:
• Redistribution or sharing of the STL files in any form
• Resale of the digital files
• Modification of the files for resale or redistribution
• Selling 3D printed kits or finished props made from these files
• Casting or vacuum forming for commercial reproduction.
Legal Notice
These models are fan-made creations inspired by existing fictional universes and are not official licensed products..
All designs are original digital works created by Jedha Workshop.
If you’d like access to future models, early releases, commercial rights and the workshop community, you can join the Jedha Workshop Patreon here:
Patreon.com/jedhaworkshop
Imperial Worker Helmer 3D Print Files (Jedi Knight II: Jedi Outcast
*PLEASE NOTE - These are 3D Print files, not a physical helmet.
Imperial workers were engineers used by the Imperial Remnant that wore hazardous environment suits as the conditions they had to work in were often dangerous. Primarily used in operating machinery and conducting repairs, therefor were not armoured, though their toughened suits could absorb mild blast damage, and were armed with a DH-17 blaster for personal protection. Many of them were slain by Kyle Katarn when he encountered them on his adventures.
Finding good reference material to help design this helmet was sparse to say the least! Just a few pixelated screenshots from the early 00’s. And upon drawing up our plans, I genuinely thought this would be a fairly easy build. As we progressed and figured out how all the shapes work with each other however, it actually became clear how complex and what a lovely design this helmet really is.
We’ve hollowed out the mohawk and added a hole through to the helmet underneath so that you can run wiring/LED’s to add a torch and can print the front glass in clear plastic/resin. There is also a printable mesh to add to the torch.
Included in this pack is the helmet as a whole one part model - with and without visor, in both 100% Scale and 1/6th Scale for figure makers, as well of course as a version carefully separated for higher detail printing and an easier paint and build!
The visor also comes separated as naturally curved to cast or vacuum form from as well as a flat printable template.
Included in these files are:
Imperial Worker Helmer
• Ear Discs (Left & Right)
• Ears (Left & Right)
• Lower Pipes (Left & Right)
• Main Helmet
• Mohawk Torch Glass
• Mohawk Torch
• Mouth Assembly
• Torch Mesh
• Upper Pipes (Left & Right)
• Visor (curved)
• Visor (Flat Template)
We are extremely proud of this Helmet!
Please only use for personal printing.
If you print or build regularly or own a shop, joining the workshop Patreon makes everything easier!
Patreon.com/jedhaworkshop
License Type: Personal Use
This purchase grants you a personal use license for the included 3D print files.
You may:
• 3D print the files for personal use
• Build, display, and enjoy the finished prop
Restrictions
The following are not permitted:
• Redistribution or sharing of the STL files in any form
• Resale of the digital files
• Modification of the files for resale or redistribution
• Selling 3D printed kits or finished props made from these files
• Casting or vacuum forming for commercial reproduction.
Legal Notice
These models are fan-made creations inspired by existing fictional universes and are not official licensed products..
All designs are original digital works created by Jedha Workshop.
If you’d like access to future models, early releases, commercial rights and the workshop community, you can join the Jedha Workshop Patreon here:
Patreon.com/jedhaworkshop
Image 1 of 14
Image 2 of 14
Image 3 of 14
Image 4 of 14
Image 5 of 14
Image 6 of 14
Image 7 of 14
Image 8 of 14
Image 9 of 14
Image 10 of 14
Image 11 of 14
Image 12 of 14
Image 13 of 14
Image 14 of 14