Onderon Guardian Helmet (Star Was The Old Republic)
*PLEASE NOTE - These are 3D Print files, not a physical helmet.
This is a very cool, rare Star Wars helmet and another worlds first 3d print design model!
The Onderon Guardian is a Cartel Market armour set from theStar Wars The Old Republic (SWTOR) video game.
Onderon guardians are force-sensitives that have existed since the Old Republic Era who serve as guards & elite units. They are loyal to the Onderon Royal Family & Galactic Republic. During the Third Galactic War, they assisted the Onderon Royal Guard when the capital came under attack by the Untamed. Thousands of years later during the Republic Era, Jedi Master Dal Eerin wore a set of Onderon guardian armor that was dark grey & red.
Onderon guardians used a lightsaber with a gold, silver & black colored hilt with a handle on one side & a small, short blade like part on the opposite side next to the top of the hilt. The blades were usually either blue, green or blood orange.
This helmet has been meticulously crafted after the beautiful in game helmet. The main face mask and back are separate and join with 4mm x 8mm cylindrical neodymium magnets (x 20 magnets). The rear and side panels have a realistic canvas fabric texture. The smaller rear ones simply glue into place from the inside of the helmet and the larger side panels join with 10mm x 2mm flat disc neodymium magnets (x 20 magnets).
The four upper rear plates are all separate for higher detail printing.
The helmet comes as fully separateas well as wholein both 100% scaleand 1/6 scale for figure makers.
Included in these files are:
Onderon Guardian Helmet
• Back
• Face
• Rear Plates (x 4)
• Rear Texture panel (x 2)
• Side Texture Panel (x 2)
• Helmet Whole 100%
• Helmet Whole 1/6 Scale
We are extremely proud of this Helmet!
You will need:
• 4mm x 8mm cylindrical neodymium magnets (x 20 magnets).
• 10mm x 2mm flat disc neodymium magnets (x 20 magnets).
Please only use for personal printing.
If you print or build regularly or own a shop, joining the workshop Patreon makes everything easier!
Patreon.com/jedhaworkshop
License Type: Personal Use
This purchase grants you a personal use license for the included 3D print files.
You may:
• 3D print the files for personal use
• Build, display, and enjoy the finished prop
Restrictions
The following are not permitted:
• Redistribution or sharing of the STL files in any form
• Resale of the digital files
• Modification of the files for resale or redistribution
• Selling 3D printed kits or finished props made from these files
• Casting or vacuum forming for commercial reproduction
Legal Notice
These models are fan-made creations inspired by existing fictional universes and are not official licensed products.
All designs are original digital works created by Jedha Workshop.
If you’d like access to future models, early releases, commercial rights and the workshop community, you can join the Jedha Workshop Patreon here:
Patreon.com/jedhaworkshop
Onderon Guardian Helmet (Star Was The Old Republic)
*PLEASE NOTE - These are 3D Print files, not a physical helmet.
This is a very cool, rare Star Wars helmet and another worlds first 3d print design model!
The Onderon Guardian is a Cartel Market armour set from theStar Wars The Old Republic (SWTOR) video game.
Onderon guardians are force-sensitives that have existed since the Old Republic Era who serve as guards & elite units. They are loyal to the Onderon Royal Family & Galactic Republic. During the Third Galactic War, they assisted the Onderon Royal Guard when the capital came under attack by the Untamed. Thousands of years later during the Republic Era, Jedi Master Dal Eerin wore a set of Onderon guardian armor that was dark grey & red.
Onderon guardians used a lightsaber with a gold, silver & black colored hilt with a handle on one side & a small, short blade like part on the opposite side next to the top of the hilt. The blades were usually either blue, green or blood orange.
This helmet has been meticulously crafted after the beautiful in game helmet. The main face mask and back are separate and join with 4mm x 8mm cylindrical neodymium magnets (x 20 magnets). The rear and side panels have a realistic canvas fabric texture. The smaller rear ones simply glue into place from the inside of the helmet and the larger side panels join with 10mm x 2mm flat disc neodymium magnets (x 20 magnets).
The four upper rear plates are all separate for higher detail printing.
The helmet comes as fully separateas well as wholein both 100% scaleand 1/6 scale for figure makers.
Included in these files are:
Onderon Guardian Helmet
• Back
• Face
• Rear Plates (x 4)
• Rear Texture panel (x 2)
• Side Texture Panel (x 2)
• Helmet Whole 100%
• Helmet Whole 1/6 Scale
We are extremely proud of this Helmet!
You will need:
• 4mm x 8mm cylindrical neodymium magnets (x 20 magnets).
• 10mm x 2mm flat disc neodymium magnets (x 20 magnets).
Please only use for personal printing.
If you print or build regularly or own a shop, joining the workshop Patreon makes everything easier!
Patreon.com/jedhaworkshop
License Type: Personal Use
This purchase grants you a personal use license for the included 3D print files.
You may:
• 3D print the files for personal use
• Build, display, and enjoy the finished prop
Restrictions
The following are not permitted:
• Redistribution or sharing of the STL files in any form
• Resale of the digital files
• Modification of the files for resale or redistribution
• Selling 3D printed kits or finished props made from these files
• Casting or vacuum forming for commercial reproduction
Legal Notice
These models are fan-made creations inspired by existing fictional universes and are not official licensed products.
All designs are original digital works created by Jedha Workshop.
If you’d like access to future models, early releases, commercial rights and the workshop community, you can join the Jedha Workshop Patreon here:
Patreon.com/jedhaworkshop
Image 1 of 15
Image 2 of 15
Image 3 of 15
Image 4 of 15
Image 5 of 15
Image 6 of 15
Image 7 of 15
Image 8 of 15
Image 9 of 15
Image 10 of 15
Image 11 of 15
Image 12 of 15
Image 13 of 15
Image 14 of 15
Image 15 of 15