Qimir The Stranger V2 Full Armour Pack 3D Print Files (The Acolyte) (Save £10!)
*PLEASE NOTE - These are 3D Print files, not physical armour.
This pack contains everything you need to cosplay Qimir accurately. Included is the V2 Helmet, the V2 Gauntlet and his ‘X’ back brace.
V2 Helmet Now updated with 10 billion improvements! For a full list of changes please scroll to the bottom of the page.
V2 Gauntlet Now updated with the new clasp!
The mysterious and bad ass sith lord trained by Darth Plagueis himself; Qimir, The Stranger or simply ‘The Master’ from The Acolyte series.
To say we went to great lengths to design this helmet accurately is an understatement. It has been more than a year long project from the first draft to the new V2. Every detail has been meticulously researched and modelled to be as accurate as possible to the show helmet.
As we got to see a brand new angle of the gauntlet thanks to the Qimir standee, we have added a more detailed buckle.
The gauntlet comes in 2 main parts clam shell style and joins with 12 x (4mm x 8mm) cyildrical neodymium magnets (not included).
There are two versions of the ‘X’ Brace, one standard and one with extended arms to allow for movement of your costume.
All parts are separated for easier printing and building.
Included in these files are:
Helmet
• Helmet Bottom
• Chin Greeblie
• Helmet Dome
• Greeblie
• Jaw
• Jaw Bracket
• Central teeth (upper and lower)
• Teeth (Upper and Lower, left and Right)
• Helmet Whole
Gauntlet
included in these files are:
• Gauntlet Top
• Gauntlet Bottom
• Greeblies 1
• Greeblies 2
X Back Brace
included in these files are:
• X Back brace (x1 part)
• X Back brace Larger (x1 part)
We are extremely proud of this Armour!
FOR SIZING
Helmet is scaled to fit a head of 60cm circumference when measured at the brow. For the Gauntlet; Measure the circumference of your wrist. In the folder there are test rings for sizing. This is a thin slice of the two halves of the gauntlet. Print the wrist test ring at 100%, 95%, 90% etc. Due to the thin size this will only take a few minutes each. Measure the inside of the test rings to see which one will fit you best. Scale all parts to that percent and print as normal. remember to scale the greeblies as well.
Please only use for personal printing.
If you print or build regularly or own a shop, joining the workshop Patreon makes everything easier!
Patreon.com/jedhaworkshop
License Type: Personal Use
This purchase grants you a personal use license for the included 3D print files.
You may:
• 3D print the files for personal use
• Build, display, and enjoy the finished prop
Restrictions
The following are not permitted:
• Redistribution or sharing of the STL files in any form
• Resale of the digital files
• Modification of the files for resale or redistribution
• Selling 3D printed kits or finished props made from these files
• Casting or vacuum forming for commercial reproduction
Legal Notice
These models are fan-made creations inspired by existing fictional universes and are not official licensed products.
All designs are original digital works created by Jedha Workshop.
If you’d like access to future models, early releases, commercial rights and the workshop community, you can join the Jedha Workshop Patreon here:
Patreon.com/jedhaworkshop
V2 Helmet Changes
We reshaped the whole shape of the helmet to give an accurate profile, completely re-designed the teeth from scratch making them hollow with vertical fixing points giving more room in the helmet, filled in the top gums, raised up the mouth, reshaped the lower jaw, reduced the jaw width, made the jaw cut outs accurately shaped. Flared out and extended the back shroud and added accurate crinkling. Stretched out and increased the thickness of the upper rear hood. Re-designed the cheek greeblie. Extended and re-mapped the entire weld lines across the whole helmet and chin and added realistic weld texturing. Added about 4,000,000,000% more accurate battle damage and scratches over the whole helmet. Re-textured the whole helmet. Extended the vertical scratch lines over the top and added deep scratch textures. Extra damage to the eye, added more detail to the chin accessory. Ditched the magnet idea and added male/female glue points to the jaw. Added location points to the dome of the helmet and - so you can print the central upper and lower teeth separately (for higher detail printing and thus easier and better filling, sanding and painting, we added a bracket that sits behind the central teeth to hold the jaw and upper helmet together without negating on space.
Qimir The Stranger V2 Full Armour Pack 3D Print Files (The Acolyte) (Save £10!)
*PLEASE NOTE - These are 3D Print files, not physical armour.
This pack contains everything you need to cosplay Qimir accurately. Included is the V2 Helmet, the V2 Gauntlet and his ‘X’ back brace.
V2 Helmet Now updated with 10 billion improvements! For a full list of changes please scroll to the bottom of the page.
V2 Gauntlet Now updated with the new clasp!
The mysterious and bad ass sith lord trained by Darth Plagueis himself; Qimir, The Stranger or simply ‘The Master’ from The Acolyte series.
To say we went to great lengths to design this helmet accurately is an understatement. It has been more than a year long project from the first draft to the new V2. Every detail has been meticulously researched and modelled to be as accurate as possible to the show helmet.
As we got to see a brand new angle of the gauntlet thanks to the Qimir standee, we have added a more detailed buckle.
The gauntlet comes in 2 main parts clam shell style and joins with 12 x (4mm x 8mm) cyildrical neodymium magnets (not included).
There are two versions of the ‘X’ Brace, one standard and one with extended arms to allow for movement of your costume.
All parts are separated for easier printing and building.
Included in these files are:
Helmet
• Helmet Bottom
• Chin Greeblie
• Helmet Dome
• Greeblie
• Jaw
• Jaw Bracket
• Central teeth (upper and lower)
• Teeth (Upper and Lower, left and Right)
• Helmet Whole
Gauntlet
included in these files are:
• Gauntlet Top
• Gauntlet Bottom
• Greeblies 1
• Greeblies 2
X Back Brace
included in these files are:
• X Back brace (x1 part)
• X Back brace Larger (x1 part)
We are extremely proud of this Armour!
FOR SIZING
Helmet is scaled to fit a head of 60cm circumference when measured at the brow. For the Gauntlet; Measure the circumference of your wrist. In the folder there are test rings for sizing. This is a thin slice of the two halves of the gauntlet. Print the wrist test ring at 100%, 95%, 90% etc. Due to the thin size this will only take a few minutes each. Measure the inside of the test rings to see which one will fit you best. Scale all parts to that percent and print as normal. remember to scale the greeblies as well.
Please only use for personal printing.
If you print or build regularly or own a shop, joining the workshop Patreon makes everything easier!
Patreon.com/jedhaworkshop
License Type: Personal Use
This purchase grants you a personal use license for the included 3D print files.
You may:
• 3D print the files for personal use
• Build, display, and enjoy the finished prop
Restrictions
The following are not permitted:
• Redistribution or sharing of the STL files in any form
• Resale of the digital files
• Modification of the files for resale or redistribution
• Selling 3D printed kits or finished props made from these files
• Casting or vacuum forming for commercial reproduction
Legal Notice
These models are fan-made creations inspired by existing fictional universes and are not official licensed products.
All designs are original digital works created by Jedha Workshop.
If you’d like access to future models, early releases, commercial rights and the workshop community, you can join the Jedha Workshop Patreon here:
Patreon.com/jedhaworkshop
V2 Helmet Changes
We reshaped the whole shape of the helmet to give an accurate profile, completely re-designed the teeth from scratch making them hollow with vertical fixing points giving more room in the helmet, filled in the top gums, raised up the mouth, reshaped the lower jaw, reduced the jaw width, made the jaw cut outs accurately shaped. Flared out and extended the back shroud and added accurate crinkling. Stretched out and increased the thickness of the upper rear hood. Re-designed the cheek greeblie. Extended and re-mapped the entire weld lines across the whole helmet and chin and added realistic weld texturing. Added about 4,000,000,000% more accurate battle damage and scratches over the whole helmet. Re-textured the whole helmet. Extended the vertical scratch lines over the top and added deep scratch textures. Extra damage to the eye, added more detail to the chin accessory. Ditched the magnet idea and added male/female glue points to the jaw. Added location points to the dome of the helmet and - so you can print the central upper and lower teeth separately (for higher detail printing and thus easier and better filling, sanding and painting, we added a bracket that sits behind the central teeth to hold the jaw and upper helmet together without negating on space.
Image 1 of 37
Image 2 of 37
Image 3 of 37
Image 4 of 37
Image 5 of 37
Image 6 of 37
Image 7 of 37
Image 8 of 37
Image 9 of 37
Image 10 of 37
Image 11 of 37
Image 12 of 37
Image 13 of 37
Image 14 of 37
Image 15 of 37
Image 16 of 37
Image 17 of 37
Image 18 of 37
Image 19 of 37
Image 20 of 37
Image 21 of 37
Image 22 of 37
Image 23 of 37
Image 24 of 37
Image 25 of 37
Image 26 of 37
Image 27 of 37
Image 28 of 37
Image 29 of 37
Image 30 of 37
Image 31 of 37
Image 32 of 37
Image 33 of 37
Image 34 of 37
Image 35 of 37
Image 36 of 37
Image 37 of 37
