Second Sister Trilla Suduri Sith Inquisitor Full Armour 3D Files (Jedi: Fallen Order)
Second Sister Trilla Suduri Sith Inquisitor Full Armour 3D Files (Jedi: Fallen Order)
*Please Note - These are Digital 3D Print files. No physical armour will be shipped.
Formerly Trilla Suduri, a Jedi Padawan who escaped the purge of Order 66 and found refuge with her master and Jedi Knight Cere Junda and in the care of several younglings - but was sadly eventually captured by the Empire, tortured and twisted to the dark side to become a cruel and relentless Sith Inquisitor and Jedi Hunter.
These are accurate 3D files for all hard parts of the Second Sisters armour.
The jaw of the helmet is separate and joined by 16 x (4mm x 8mm) cylindrical neodymium magnets and it also has an inner shroud which is attached by 6 x magnets. The cheek vents are hollow to allow you to add real wire mesh, or you can print them with the vent model included.
The Gauntlets are 2 parts and require 12 x (4mm x 8mm) neodymium magnets for each one and you can print the main and side buttons in clear pla/resin to add LED’s/EL Wire.
Parts included are:
Armour
• Shoulders
• Chest Badges
• Belt
Gauntlets
• Gauntlet Top
• Gauntlet Bottom
• Bottom Detail
• Top LED
• Top Buttons
• Side LED
• Accessories
Helmet
• Main helmet
• Jaw
• Inner Shroud
• Vent
You will need:
• 46 x (4mm x 8mm) cylindrical neodymium magnets
We are extremely proud of this Armour!
Files will be available for immediate download from this website upon purchase.
Please only use for personal printing.
Did you know - you can get this helmet and many more half price through our Patreon? You also get exclusive content and access to our members Only Facebook builders and printers group.
www.patreon.com/jedhaworkshop
LEGAL
• This is not an official licensed product and is considered ‘Fan Art’. The copyright of this product does not belong to the seller.
• CC License. Commercial selling or modification is not permitted unless express permission has been granted by Jedha Workshop. Please only use for personal printing.
Second Sister Trilla Suduri Sith Inquisitor Full Armour 3D Files (Jedi: Fallen Order)
*Please Note - These are Digital 3D Print files. No physical armour will be shipped.
Formerly Trilla Suduri, a Jedi Padawan who escaped the purge of Order 66 and found refuge with her master and Jedi Knight Cere Junda and in the care of several younglings - but was sadly eventually captured by the Empire, tortured and twisted to the dark side to become a cruel and relentless Sith Inquisitor and Jedi Hunter.
These are accurate 3D files for all hard parts of the Second Sisters armour.
The jaw of the helmet is separate and joined by 16 x (4mm x 8mm) cylindrical neodymium magnets and it also has an inner shroud which is attached by 6 x magnets. The cheek vents are hollow to allow you to add real wire mesh, or you can print them with the vent model included.
The Gauntlets are 2 parts and require 12 x (4mm x 8mm) neodymium magnets for each one and you can print the main and side buttons in clear pla/resin to add LED’s/EL Wire.
Parts included are:
Armour
• Shoulders
• Chest Badges
• Belt
Gauntlets
• Gauntlet Top
• Gauntlet Bottom
• Bottom Detail
• Top LED
• Top Buttons
• Side LED
• Accessories
Helmet
• Main helmet
• Jaw
• Inner Shroud
• Vent
You will need:
• 46 x (4mm x 8mm) cylindrical neodymium magnets
We are extremely proud of this Armour!
Files will be available for immediate download from this website upon purchase.
Please only use for personal printing.
Did you know - you can get this helmet and many more half price through our Patreon? You also get exclusive content and access to our members Only Facebook builders and printers group.
www.patreon.com/jedhaworkshop
LEGAL
• This is not an official licensed product and is considered ‘Fan Art’. The copyright of this product does not belong to the seller.
• CC License. Commercial selling or modification is not permitted unless express permission has been granted by Jedha Workshop. Please only use for personal printing.
Second Sister Trilla Suduri Sith Inquisitor Full Armour 3D Files (Jedi: Fallen Order)
*Please Note - These are Digital 3D Print files. No physical armour will be shipped.
Formerly Trilla Suduri, a Jedi Padawan who escaped the purge of Order 66 and found refuge with her master and Jedi Knight Cere Junda and in the care of several younglings - but was sadly eventually captured by the Empire, tortured and twisted to the dark side to become a cruel and relentless Sith Inquisitor and Jedi Hunter.
These are accurate 3D files for all hard parts of the Second Sisters armour.
The jaw of the helmet is separate and joined by 16 x (4mm x 8mm) cylindrical neodymium magnets and it also has an inner shroud which is attached by 6 x magnets. The cheek vents are hollow to allow you to add real wire mesh, or you can print them with the vent model included.
The Gauntlets are 2 parts and require 12 x (4mm x 8mm) neodymium magnets for each one and you can print the main and side buttons in clear pla/resin to add LED’s/EL Wire.
Parts included are:
Armour
• Shoulders
• Chest Badges
• Belt
Gauntlets
• Gauntlet Top
• Gauntlet Bottom
• Bottom Detail
• Top LED
• Top Buttons
• Side LED
• Accessories
Helmet
• Main helmet
• Jaw
• Inner Shroud
• Vent
You will need:
• 46 x (4mm x 8mm) cylindrical neodymium magnets
We are extremely proud of this Armour!
Files will be available for immediate download from this website upon purchase.
Please only use for personal printing.
Did you know - you can get this helmet and many more half price through our Patreon? You also get exclusive content and access to our members Only Facebook builders and printers group.
www.patreon.com/jedhaworkshop
LEGAL
• This is not an official licensed product and is considered ‘Fan Art’. The copyright of this product does not belong to the seller.
• CC License. Commercial selling or modification is not permitted unless express permission has been granted by Jedha Workshop. Please only use for personal printing.
