Tusken Warrior + Gaffi Stick Double Pack 3D Print Files (The Book of Boba Fett) (Save £8)
PLEASE NOTE: This is a digital 3D print file, not a physical helmet.
In this pack you get both the Tusken Warrior Helmet and the unique Warrior Gaffi stick!
Tusken Warrior Helmet Description
The fantastic Tusken Warrior! This is a very similar kit based on our extremely popular 'A New Hope' style Tusken but with some subtle and important changes to be more accurate to the Warrior in TBOBF. Not only this, but we’ve also made a bunch of improvements to make the build and fitting even easier!
The Binoculars are bigger, less conical and more cylindrical, with no slits. They also thread through from the inside like everything else. The Top spikes are shorter and thicker and the top spike placement has been relocated to be higher and with multiple holes for different formations.
From this kit you can make the Tusken Warrior or any member of the Tribe including the Tusken Child, - or your very own custom version.
There’s new holes in the cheeks to allow for easier placement of the blood spitters as well as the eye holes. Both have glue bases to thread from the inside of the helmet.
The mouth has been reduced in size to allow for the layers of leather. It has also been reshaped and the mouth hole position moved higher, made smaller and more square.
The Nose has thinner slits which are slightly off-set accurate to the show.
The Respirator has been elongated and reduced in diameter.
The Respirator tube is included as a printable part however, we recommend using 5mm flexible craft wire which is a diameter required for 501st approval.
The main update is that the helmet is now spit into two with holes so you can elastic chord in between to stretch over your head which is how they made the roginal masks in A New Hope in 1977! Whereas before the bottom hole limited us in scale (for bigger heads we had to print bigger and thus looked oversized). This update allows us to print it a whole 10% smaller scale making it more accurate in size, whilst retaining the structure and rigidity of the helmet/under-mask as it can now stretch over your head.
*Please note - if utilising this feature, you will of course have to stretch the two halves of the helmet on the inside to you full head depth whilst applying your canvas wraps.
All parts are separated for easier printing, building and painting. The helmet also comes in a whole one part at both 100% scale and 1/6th Scale for figure makers.
There is also a Test ring of the main helmet for scaling.
The front mask and snout are also split for smaller printer beds.
Included in this pack are:
Tusken Warrior Helmet TBOBF
• Main helmet (x 2 parts front and back)
• Helmet Whole 100% and 1/6th Scale
Accessories:
• Binoculars Left & Right.
• Nose
• Blood Spitters Left & Right.
• Head Spikes Front Left, Front Right, Back Left, Back Right.
• Respirator
• Respirator End Pieces (Print x 2)
• Respirator Whole.
• Respirator tube.
• You can also print the respirator tube however we recommend you use 5mm diameter craft aluminium pipe.
Gaffi Stick - Warrior Variant Description
The Gaderffi of ‘Gaffi’ Stick is the traditional melee weapon of choice used by the Tusken Raiders of Tatooine.
There are several variations depending on the style of the user. This is the unique ‘Warrior’ variant we see used in The Book of Boba Fett as the hardened Tusken Warrior trains boba fett in brutal Gaderffi combat.
This Gaffi stick has been meticulously researched and designed going by high resolution images of the original prop for maximum accuracy!
It has a four bladed teardrop shape mace with no spear point, a much larger profile pineapple head than others, is slightly shorter than most and it has its own unique pattern carved into a top handle as well as a double handle at the bottom.
It has been designed for a long 1” (2.54cm) diameter wooden dowel to be threaded through the upper sections, including a small piece for the head to give strength, and the mace has its own male/female glue point.
All parts are separate for easier printing and building.
Included in this pack are:
• Pineapple Top
• Pineapple Bottom
• Bend
• Top Handle
• Main Shaft (available split into two for smaller printers)
• Mace
• You will need a :
• 1” (2.54cm) diameter wooden dowel approx 80cm long
• 1” (2.54cm) diameter wooden dowel approx 12cm long
SIZE
This is a Life Size 1:1 Scale prop. Printed at 100% it is approx 1.45m long.
License Type: Personal Use
This purchase grants you a personal use license for the included 3D print files.
You may:
• 3D print the files for personal use
• Build, display, and enjoy the finished prop
Restrictions
The following are not permitted:
• Redistribution or sharing of the STL files in any form
• Resale of the digital files
• Modification of the files for resale or redistribution
• Selling 3D printed kits or finished props made from these files
• Casting or vacuum forming for commercial reproduction
Legal Notice
These models are fan-made creations inspired by existing fictional universes and are not official licensed products.
All designs are original digital works created by Jedha Workshop.
If you’d like access to future models, early releases, commercial rights and the workshop community, you can join the Jedha Workshop Patreon here:
Patreon.com/jedhaworkshop
Tusken Warrior + Gaffi Stick Double Pack 3D Print Files (The Book of Boba Fett) (Save £8)
PLEASE NOTE: This is a digital 3D print file, not a physical helmet.
In this pack you get both the Tusken Warrior Helmet and the unique Warrior Gaffi stick!
Tusken Warrior Helmet Description
The fantastic Tusken Warrior! This is a very similar kit based on our extremely popular 'A New Hope' style Tusken but with some subtle and important changes to be more accurate to the Warrior in TBOBF. Not only this, but we’ve also made a bunch of improvements to make the build and fitting even easier!
The Binoculars are bigger, less conical and more cylindrical, with no slits. They also thread through from the inside like everything else. The Top spikes are shorter and thicker and the top spike placement has been relocated to be higher and with multiple holes for different formations.
From this kit you can make the Tusken Warrior or any member of the Tribe including the Tusken Child, - or your very own custom version.
There’s new holes in the cheeks to allow for easier placement of the blood spitters as well as the eye holes. Both have glue bases to thread from the inside of the helmet.
The mouth has been reduced in size to allow for the layers of leather. It has also been reshaped and the mouth hole position moved higher, made smaller and more square.
The Nose has thinner slits which are slightly off-set accurate to the show.
The Respirator has been elongated and reduced in diameter.
The Respirator tube is included as a printable part however, we recommend using 5mm flexible craft wire which is a diameter required for 501st approval.
The main update is that the helmet is now spit into two with holes so you can elastic chord in between to stretch over your head which is how they made the roginal masks in A New Hope in 1977! Whereas before the bottom hole limited us in scale (for bigger heads we had to print bigger and thus looked oversized). This update allows us to print it a whole 10% smaller scale making it more accurate in size, whilst retaining the structure and rigidity of the helmet/under-mask as it can now stretch over your head.
*Please note - if utilising this feature, you will of course have to stretch the two halves of the helmet on the inside to you full head depth whilst applying your canvas wraps.
All parts are separated for easier printing, building and painting. The helmet also comes in a whole one part at both 100% scale and 1/6th Scale for figure makers.
There is also a Test ring of the main helmet for scaling.
The front mask and snout are also split for smaller printer beds.
Included in this pack are:
Tusken Warrior Helmet TBOBF
• Main helmet (x 2 parts front and back)
• Helmet Whole 100% and 1/6th Scale
Accessories:
• Binoculars Left & Right.
• Nose
• Blood Spitters Left & Right.
• Head Spikes Front Left, Front Right, Back Left, Back Right.
• Respirator
• Respirator End Pieces (Print x 2)
• Respirator Whole.
• Respirator tube.
• You can also print the respirator tube however we recommend you use 5mm diameter craft aluminium pipe.
Gaffi Stick - Warrior Variant Description
The Gaderffi of ‘Gaffi’ Stick is the traditional melee weapon of choice used by the Tusken Raiders of Tatooine.
There are several variations depending on the style of the user. This is the unique ‘Warrior’ variant we see used in The Book of Boba Fett as the hardened Tusken Warrior trains boba fett in brutal Gaderffi combat.
This Gaffi stick has been meticulously researched and designed going by high resolution images of the original prop for maximum accuracy!
It has a four bladed teardrop shape mace with no spear point, a much larger profile pineapple head than others, is slightly shorter than most and it has its own unique pattern carved into a top handle as well as a double handle at the bottom.
It has been designed for a long 1” (2.54cm) diameter wooden dowel to be threaded through the upper sections, including a small piece for the head to give strength, and the mace has its own male/female glue point.
All parts are separate for easier printing and building.
Included in this pack are:
• Pineapple Top
• Pineapple Bottom
• Bend
• Top Handle
• Main Shaft (available split into two for smaller printers)
• Mace
• You will need a :
• 1” (2.54cm) diameter wooden dowel approx 80cm long
• 1” (2.54cm) diameter wooden dowel approx 12cm long
SIZE
This is a Life Size 1:1 Scale prop. Printed at 100% it is approx 1.45m long.
License Type: Personal Use
This purchase grants you a personal use license for the included 3D print files.
You may:
• 3D print the files for personal use
• Build, display, and enjoy the finished prop
Restrictions
The following are not permitted:
• Redistribution or sharing of the STL files in any form
• Resale of the digital files
• Modification of the files for resale or redistribution
• Selling 3D printed kits or finished props made from these files
• Casting or vacuum forming for commercial reproduction
Legal Notice
These models are fan-made creations inspired by existing fictional universes and are not official licensed products.
All designs are original digital works created by Jedha Workshop.
If you’d like access to future models, early releases, commercial rights and the workshop community, you can join the Jedha Workshop Patreon here:
Patreon.com/jedhaworkshop
Image 1 of 27
Image 2 of 27
Image 3 of 27
Image 4 of 27
Image 5 of 27
Image 6 of 27
Image 7 of 27
Image 8 of 27
Image 9 of 27
Image 10 of 27
Image 11 of 27
Image 12 of 27
Image 13 of 27
Image 14 of 27
Image 15 of 27
Image 16 of 27
Image 17 of 27
Image 18 of 27
Image 19 of 27
Image 20 of 27
Image 21 of 27
Image 22 of 27
Image 23 of 27
Image 24 of 27
Image 25 of 27
Image 26 of 27
Image 27 of 27
