Tusken Raider Original Helmet + Gaffi Stick 3D Files (A NEW HOPE) (Save £8)
PLEASE NOTE: This is a digital 3D print file, not a physical helmet.
In this pack you get both the original A New Hope style Tusken Raider Helmet and his iconic Gaffi stick!
Tutorial video of this exact helmet Here.
Helmet Description
The incredible Tusken Raider originally seen in A New Hope …massacred in Episode II and a different side of them more recently seen in the Mandalorian and The Book of Boba Fett. This kit has been lovingly modelled after the original prop ‘under helmet’ and accessories.
*Please Note - This is a different style and shape to the ‘The Book of Boba Fett’ Style Helmet kit. For those 3D files click here.
Differences are: Binos are conical in shape with two vertical slits. Top spikes are taller and thinner with a different placement and angle. Nose slits are symmetrical. Mouth is wider and bulkier.
The only parts that need to be post-processed are the accessories themselves. The helmet gives you the perfect base to add leather and fabric wraps. The helmet also comes in three parts and can either be glued as one piece or you can add flexible fabric in-between to allow for more movement. It also comes with the respirator and end pieces so all you need is 5mm diameter bendable aluminium tubing.
As this is more of a mask than a helmet, we modelled it to be more like a second skin (with a little breathing room) so not to appear too large once fabric is added.
The Respirator tube is included as a printable part however, we recommend using 5mm flexible craft wire which is a diameter required for 501st approval.
All parts are separated for easier printing, building and painting. The helmet also comes in a whole one part at both 100% scale for sizing and 1/6th Scale for figure makers.
There is also a Test ring of the main helmet for scaling.
The front mask and snout and helmet are also split into 3 parts or smaller printer beds.
This Pack includes the following parts:
Tusken Raider ANH
• Main Helmet
• Main Helmet Whole 100% and 1/6th Scale.
• Binos Left & Right
• Top Spikes FL, FR, BL, BR.
• Blood Spitters Left & Right
• Nose
• Respirator
• Respirator End Pieces
• Respirator Whole.
• Respirator Tube
We are extremely proud of this helmet!
Gaffi Stick Description
The Gaderffi of ‘Gaffi’ Stick is the traditional melee weapon of choice used by the Tusken Raiders of Tatooine.
There are several variations depending on the style of the user. This is the first and original seen in Star Wars - A New Hope. It has a four bladed mace and a large, spherical shaped pineapple head, with a short spear and even includes the weld marks on the mace.
We have lovingly crafted this to be as accurate as possible to the original movie version.
It has been designed for a 1” (2.54cm) wooden dowel to be threaded through the sections to give strength.
All parts are separate for easier printing and building.
Included in this pack are:
• Pineapple Head Top
• Pineapple Head Bottom
• Wooden upper section x 2 parts
• Handle
• Spear Top
• Mace
• Spear Lower
• You will need a :
• 1” (2.54cm) diameter wooden dowel.
We are very proud of this weapon!
SIZE
This is a Life Size 1:1 Scale prop. Printed at 100% it is approx 1.20m long.
Files will be available for immediate download from this site upon purchase and available for 5 days afterwards.
Please only use for personal printing.
If you print or build regularly or own a shop, joining the workshop Patreon makes everything easier!
Patreon.com/jedhaworkshop
License Type: Personal Use
This purchase grants you a personal use license for the included 3D print files.
You may:
• 3D print the files for personal use
• Build, display, and enjoy the finished prop
Restrictions
The following are not permitted:
• Redistribution or sharing of the STL files in any form
• Resale of the digital files
• Modification of the files for resale or redistribution
• Selling 3D printed kits or finished props made from these files
• Casting or vacuum forming for commercial reproduction
Legal Notice
These models are fan-made creations inspired by existing fictional universes and are not official licensed products.
All designs are original digital works created by Jedha Workshop.
If you’d like access to future models, early releases, commercial rights and the workshop community, you can join the Jedha Workshop Patreon here:
Patreon.com/jedhaworkshop
Tusken Raider Original Helmet + Gaffi Stick 3D Files (A NEW HOPE) (Save £8)
PLEASE NOTE: This is a digital 3D print file, not a physical helmet.
In this pack you get both the original A New Hope style Tusken Raider Helmet and his iconic Gaffi stick!
Tutorial video of this exact helmet Here.
Helmet Description
The incredible Tusken Raider originally seen in A New Hope …massacred in Episode II and a different side of them more recently seen in the Mandalorian and The Book of Boba Fett. This kit has been lovingly modelled after the original prop ‘under helmet’ and accessories.
*Please Note - This is a different style and shape to the ‘The Book of Boba Fett’ Style Helmet kit. For those 3D files click here.
Differences are: Binos are conical in shape with two vertical slits. Top spikes are taller and thinner with a different placement and angle. Nose slits are symmetrical. Mouth is wider and bulkier.
The only parts that need to be post-processed are the accessories themselves. The helmet gives you the perfect base to add leather and fabric wraps. The helmet also comes in three parts and can either be glued as one piece or you can add flexible fabric in-between to allow for more movement. It also comes with the respirator and end pieces so all you need is 5mm diameter bendable aluminium tubing.
As this is more of a mask than a helmet, we modelled it to be more like a second skin (with a little breathing room) so not to appear too large once fabric is added.
The Respirator tube is included as a printable part however, we recommend using 5mm flexible craft wire which is a diameter required for 501st approval.
All parts are separated for easier printing, building and painting. The helmet also comes in a whole one part at both 100% scale for sizing and 1/6th Scale for figure makers.
There is also a Test ring of the main helmet for scaling.
The front mask and snout and helmet are also split into 3 parts or smaller printer beds.
This Pack includes the following parts:
Tusken Raider ANH
• Main Helmet
• Main Helmet Whole 100% and 1/6th Scale.
• Binos Left & Right
• Top Spikes FL, FR, BL, BR.
• Blood Spitters Left & Right
• Nose
• Respirator
• Respirator End Pieces
• Respirator Whole.
• Respirator Tube
We are extremely proud of this helmet!
Gaffi Stick Description
The Gaderffi of ‘Gaffi’ Stick is the traditional melee weapon of choice used by the Tusken Raiders of Tatooine.
There are several variations depending on the style of the user. This is the first and original seen in Star Wars - A New Hope. It has a four bladed mace and a large, spherical shaped pineapple head, with a short spear and even includes the weld marks on the mace.
We have lovingly crafted this to be as accurate as possible to the original movie version.
It has been designed for a 1” (2.54cm) wooden dowel to be threaded through the sections to give strength.
All parts are separate for easier printing and building.
Included in this pack are:
• Pineapple Head Top
• Pineapple Head Bottom
• Wooden upper section x 2 parts
• Handle
• Spear Top
• Mace
• Spear Lower
• You will need a :
• 1” (2.54cm) diameter wooden dowel.
We are very proud of this weapon!
SIZE
This is a Life Size 1:1 Scale prop. Printed at 100% it is approx 1.20m long.
Files will be available for immediate download from this site upon purchase and available for 5 days afterwards.
Please only use for personal printing.
If you print or build regularly or own a shop, joining the workshop Patreon makes everything easier!
Patreon.com/jedhaworkshop
License Type: Personal Use
This purchase grants you a personal use license for the included 3D print files.
You may:
• 3D print the files for personal use
• Build, display, and enjoy the finished prop
Restrictions
The following are not permitted:
• Redistribution or sharing of the STL files in any form
• Resale of the digital files
• Modification of the files for resale or redistribution
• Selling 3D printed kits or finished props made from these files
• Casting or vacuum forming for commercial reproduction
Legal Notice
These models are fan-made creations inspired by existing fictional universes and are not official licensed products.
All designs are original digital works created by Jedha Workshop.
If you’d like access to future models, early releases, commercial rights and the workshop community, you can join the Jedha Workshop Patreon here:
Patreon.com/jedhaworkshop
Image 1 of 27
Image 2 of 27
Image 3 of 27
Image 4 of 27
Image 5 of 27
Image 6 of 27
Image 7 of 27
Image 8 of 27
Image 9 of 27
Image 10 of 27
Image 11 of 27
Image 12 of 27
Image 13 of 27
Image 14 of 27
Image 15 of 27
Image 16 of 27
Image 17 of 27
Image 18 of 27
Image 19 of 27
Image 20 of 27
Image 21 of 27
Image 22 of 27
Image 23 of 27
Image 24 of 27
Image 25 of 27
Image 26 of 27
Image 27 of 27
