Bo-Katan Kryze / Female Mando Jetpack and Back Armour Only 3D Files (The Mandalorian)
PLEASE NOTE: This is a digital 3D print file, not a physical prop.
The Jetpack used by Rightful ruler of Mandalore herself; Bo Katan of Clan Kryze.
No expense has been spared for the accuracy and detail of these files.
The Jetpack is hollow with a door on the inside so you can add thruster lights, soundboard and electronics and has also been pre-cut and strategically separated so you can print on smaller beds.
We’ve also included our Back Armour plate to fit it onto.
This Jetpack has been design to fit onto our back plate armour. It has 2 large holes for hooks on the inside top and one circular plug hole to affix at the bottom.
Parts included are:
• Bo Katan Back Armour Plate
Jetpack
• Antenna
• Cover
• Exhaust
• Left
• Right
• Main
• Shroud
• Top centre
• Tops (Left & Right)
We are very proud of this Jetpack!
Files will be available for immediate download from this site upon purchase and available for 5 days afterwards.
License Type: Personal Use
This purchase grants you a personal use license for the included 3D print files.
You may:
• 3D print the files for personal use
• Build, display, and enjoy the finished prop
Restrictions
The following are not permitted:
• Redistribution or sharing of the STL files in any form
• Resale of the digital files
• Modification of the files for resale or redistribution
• Selling 3D printed kits or finished props made from these files
• Casting or vacuum forming for commercial reproduction
Legal Notice
These models are fan-made creations inspired by existing fictional universes and are not official licensed products.
All designs are original digital works created by Jedha Workshop.
If you’d like access to future models, early releases, commercial rights and the workshop community, you can join the Jedha Workshop Patreon here:
Patreon.com/jedhaworkshop
Bo-Katan Kryze / Female Mando Jetpack and Back Armour Only 3D Files (The Mandalorian)
PLEASE NOTE: This is a digital 3D print file, not a physical prop.
The Jetpack used by Rightful ruler of Mandalore herself; Bo Katan of Clan Kryze.
No expense has been spared for the accuracy and detail of these files.
The Jetpack is hollow with a door on the inside so you can add thruster lights, soundboard and electronics and has also been pre-cut and strategically separated so you can print on smaller beds.
We’ve also included our Back Armour plate to fit it onto.
This Jetpack has been design to fit onto our back plate armour. It has 2 large holes for hooks on the inside top and one circular plug hole to affix at the bottom.
Parts included are:
• Bo Katan Back Armour Plate
Jetpack
• Antenna
• Cover
• Exhaust
• Left
• Right
• Main
• Shroud
• Top centre
• Tops (Left & Right)
We are very proud of this Jetpack!
Files will be available for immediate download from this site upon purchase and available for 5 days afterwards.
License Type: Personal Use
This purchase grants you a personal use license for the included 3D print files.
You may:
• 3D print the files for personal use
• Build, display, and enjoy the finished prop
Restrictions
The following are not permitted:
• Redistribution or sharing of the STL files in any form
• Resale of the digital files
• Modification of the files for resale or redistribution
• Selling 3D printed kits or finished props made from these files
• Casting or vacuum forming for commercial reproduction
Legal Notice
These models are fan-made creations inspired by existing fictional universes and are not official licensed products.
All designs are original digital works created by Jedha Workshop.
If you’d like access to future models, early releases, commercial rights and the workshop community, you can join the Jedha Workshop Patreon here:
Patreon.com/jedhaworkshop
Image 1 of 16
Image 2 of 16
Image 3 of 16
Image 4 of 16
Image 5 of 16
Image 6 of 16
Image 7 of 16
Image 8 of 16
Image 9 of 16
Image 10 of 16
Image 11 of 16
Image 12 of 16
Image 13 of 16
Image 14 of 16
Image 15 of 16
Image 16 of 16
