Bo-Katan Kryze Full Live Action DIY Armour Kit (The Mandalorian)
Bo-Katan Kryze Full Live Action DIY Armour Kit (The Mandalorian)
*PLEASE NOTE- This is a DIY kit. The parts will need sanding, filling and painting and the fun is all in the build!
The Rightful ruler of Mandalore herself; Bo Katan of Clan Kryze.
No expense has been spared for the accuracy and detail of this armour.
The gauntlets are both clam shells, you will need 6 x (4mm x 8mm) cylindrical neodymium magnets for each one. The left hand gauntlet has a hollow whistling birds and seperate keypad for you to add your own LED’s and electronics and also snaps on and off with 3 x (4mm x 8mm) cylindrical neodymium magnets so you can access with ease.
The right hand gauntlet is extra special as it has a fully working spring loaded wrist blade! It requires a 100mm (free length ) compressed spring for the main mechanism and a smaller 10mm (free length) spring for the release button.
All smaller Antennas are seperate for higher detail printing.
You will need 15 x (4mm x 8mm) cylindrical neodymium magnets in total.
The jet pack is hollow with a door on the inside so you can add thruster lights and soundboard and has also been pre-cut and strategically separated so you can print on smaller beds.
The Westar 35 Blaster Pistol comes as a solid version or in seperate parts to reduce masking so you can print and paint all the chrome bits and black parts separately and construct.
The right shoulder bell comes in 3 versions; Original plain, With Mythosaur emblem and with the Mythosaur emblem seperate for ease of painting.
Fully articulated rangefinder on our already popular and highly accurate Bo-Katan helmet.
Exceptional detail on all armour pieces and sized for the average female build.
Actual raw 3D printed parts received are:
HELMET
• Back grill
• Helmet
• Left ear lower
• Left ear upper
• RF acrylic
• RF camera
• RF Head
• RF Stalk
• Right Ear lower
• Right Ear Outer
• Right Ear Upper
ARMOUR
• Headband
• Chest Plate
• Abdomen
• Back Plate
• Collar Left/Right
• Belt
• Groin Plate
• Shoulder - Left, Right, Right with Mythosaur Emblem, Right for Mythosaur Emblem, Mythosaur Emblem.
• Jetpack - Antenna, Cover, Exhaust, Left, Right, Main, Shroud, Top centre and Top Sides.
• Left Forearm Gauntlet - Inner, Outer, Whistling Birds, Keypad
• Right Forearm Gauntlet- Inner, Outer, Antenna 1, 2, 3, Blade, Blade Block, Blade Button, Cover
• Hand Plates Left/Right
• Thighs Left/Right
• Knee Left/Right
• Shins Left/Right
WESTAR 35 BLASTER PISTOL x2
• Barrel
• Handle
• Magazine
• Muzzle
• Rear
• Safety Lever 1, 2
• Trigger Guard 1, 2
• Trigger
We are extremely proud of this Armour!
MATERIAL
Printed in PLA, a sustainable and environmentally friendly plastic.
Optional Extras
• Available with or without helmet.
• Now available with Visor + £12
Replacement grinder shield which is flexible and can be cut with scissors.
SIZING
Helmet -This helmet fits most adult female heads. If you believe you have a head larger than the average Uk female of 55.2 cm circumference (measured at the brow), then please add a note to your order to print larger.
Armour -We will contact you by email with all the body measurements needed and print for your personal size.
HOW LONG?
We aim to print and get things shipped out to you within 4 weeks. However depending on volume or print failures it can take up to 6 weeks so please bare with us.
SHIPPING
Will be sent carefully and well packaged in 2 boxes.
UK Shipping £25 - Royal Mail Special Delivery.
Europe Shipping £56 - Royal Mail International Tracked
Worldwide Shipping £64 - Royal Mail International Tracked
US Shipping £72 - Royal Mail International Tracked
LEGAL
• This is not an official licensed product and is considered ‘Fan Art’. The copyright of this product does not belong to the seller.
• Buyers are responsible for any Customs and import taxes
• Due to the custom nature of the work, print and dispatch times may vary and are estimates only.
• Shipping delays can happen. Postage has been affected everywhere by the global pandemic, please understand that we cannot control everything but try our best to get your order to you as fast as possible
Bo-Katan Kryze Full Live Action DIY Armour Kit (The Mandalorian)
*PLEASE NOTE- This is a DIY kit. The parts will need sanding, filling and painting and the fun is all in the build!
The Rightful ruler of Mandalore herself; Bo Katan of Clan Kryze.
No expense has been spared for the accuracy and detail of this armour.
The gauntlets are both clam shells, you will need 6 x (4mm x 8mm) cylindrical neodymium magnets for each one. The left hand gauntlet has a hollow whistling birds and seperate keypad for you to add your own LED’s and electronics and also snaps on and off with 3 x (4mm x 8mm) cylindrical neodymium magnets so you can access with ease.
The right hand gauntlet is extra special as it has a fully working spring loaded wrist blade! It requires a 100mm (free length ) compressed spring for the main mechanism and a smaller 10mm (free length) spring for the release button.
All smaller Antennas are seperate for higher detail printing.
You will need 15 x (4mm x 8mm) cylindrical neodymium magnets in total.
The jet pack is hollow with a door on the inside so you can add thruster lights and soundboard and has also been pre-cut and strategically separated so you can print on smaller beds.
The Westar 35 Blaster Pistol comes as a solid version or in seperate parts to reduce masking so you can print and paint all the chrome bits and black parts separately and construct.
The right shoulder bell comes in 3 versions; Original plain, With Mythosaur emblem and with the Mythosaur emblem seperate for ease of painting.
Fully articulated rangefinder on our already popular and highly accurate Bo-Katan helmet.
Exceptional detail on all armour pieces and sized for the average female build.
Actual raw 3D printed parts received are:
HELMET
• Back grill
• Helmet
• Left ear lower
• Left ear upper
• RF acrylic
• RF camera
• RF Head
• RF Stalk
• Right Ear lower
• Right Ear Outer
• Right Ear Upper
ARMOUR
• Headband
• Chest Plate
• Abdomen
• Back Plate
• Collar Left/Right
• Belt
• Groin Plate
• Shoulder - Left, Right, Right with Mythosaur Emblem, Right for Mythosaur Emblem, Mythosaur Emblem.
• Jetpack - Antenna, Cover, Exhaust, Left, Right, Main, Shroud, Top centre and Top Sides.
• Left Forearm Gauntlet - Inner, Outer, Whistling Birds, Keypad
• Right Forearm Gauntlet- Inner, Outer, Antenna 1, 2, 3, Blade, Blade Block, Blade Button, Cover
• Hand Plates Left/Right
• Thighs Left/Right
• Knee Left/Right
• Shins Left/Right
WESTAR 35 BLASTER PISTOL x2
• Barrel
• Handle
• Magazine
• Muzzle
• Rear
• Safety Lever 1, 2
• Trigger Guard 1, 2
• Trigger
We are extremely proud of this Armour!
MATERIAL
Printed in PLA, a sustainable and environmentally friendly plastic.
Optional Extras
• Available with or without helmet.
• Now available with Visor + £12
Replacement grinder shield which is flexible and can be cut with scissors.
SIZING
Helmet -This helmet fits most adult female heads. If you believe you have a head larger than the average Uk female of 55.2 cm circumference (measured at the brow), then please add a note to your order to print larger.
Armour -We will contact you by email with all the body measurements needed and print for your personal size.
HOW LONG?
We aim to print and get things shipped out to you within 4 weeks. However depending on volume or print failures it can take up to 6 weeks so please bare with us.
SHIPPING
Will be sent carefully and well packaged in 2 boxes.
UK Shipping £25 - Royal Mail Special Delivery.
Europe Shipping £56 - Royal Mail International Tracked
Worldwide Shipping £64 - Royal Mail International Tracked
US Shipping £72 - Royal Mail International Tracked
LEGAL
• This is not an official licensed product and is considered ‘Fan Art’. The copyright of this product does not belong to the seller.
• Buyers are responsible for any Customs and import taxes
• Due to the custom nature of the work, print and dispatch times may vary and are estimates only.
• Shipping delays can happen. Postage has been affected everywhere by the global pandemic, please understand that we cannot control everything but try our best to get your order to you as fast as possible
Bo-Katan Kryze Full Live Action DIY Armour Kit (The Mandalorian)
*PLEASE NOTE- This is a DIY kit. The parts will need sanding, filling and painting and the fun is all in the build!
The Rightful ruler of Mandalore herself; Bo Katan of Clan Kryze.
No expense has been spared for the accuracy and detail of this armour.
The gauntlets are both clam shells, you will need 6 x (4mm x 8mm) cylindrical neodymium magnets for each one. The left hand gauntlet has a hollow whistling birds and seperate keypad for you to add your own LED’s and electronics and also snaps on and off with 3 x (4mm x 8mm) cylindrical neodymium magnets so you can access with ease.
The right hand gauntlet is extra special as it has a fully working spring loaded wrist blade! It requires a 100mm (free length ) compressed spring for the main mechanism and a smaller 10mm (free length) spring for the release button.
All smaller Antennas are seperate for higher detail printing.
You will need 15 x (4mm x 8mm) cylindrical neodymium magnets in total.
The jet pack is hollow with a door on the inside so you can add thruster lights and soundboard and has also been pre-cut and strategically separated so you can print on smaller beds.
The Westar 35 Blaster Pistol comes as a solid version or in seperate parts to reduce masking so you can print and paint all the chrome bits and black parts separately and construct.
The right shoulder bell comes in 3 versions; Original plain, With Mythosaur emblem and with the Mythosaur emblem seperate for ease of painting.
Fully articulated rangefinder on our already popular and highly accurate Bo-Katan helmet.
Exceptional detail on all armour pieces and sized for the average female build.
Actual raw 3D printed parts received are:
HELMET
• Back grill
• Helmet
• Left ear lower
• Left ear upper
• RF acrylic
• RF camera
• RF Head
• RF Stalk
• Right Ear lower
• Right Ear Outer
• Right Ear Upper
ARMOUR
• Headband
• Chest Plate
• Abdomen
• Back Plate
• Collar Left/Right
• Belt
• Groin Plate
• Shoulder - Left, Right, Right with Mythosaur Emblem, Right for Mythosaur Emblem, Mythosaur Emblem.
• Jetpack - Antenna, Cover, Exhaust, Left, Right, Main, Shroud, Top centre and Top Sides.
• Left Forearm Gauntlet - Inner, Outer, Whistling Birds, Keypad
• Right Forearm Gauntlet- Inner, Outer, Antenna 1, 2, 3, Blade, Blade Block, Blade Button, Cover
• Hand Plates Left/Right
• Thighs Left/Right
• Knee Left/Right
• Shins Left/Right
WESTAR 35 BLASTER PISTOL x2
• Barrel
• Handle
• Magazine
• Muzzle
• Rear
• Safety Lever 1, 2
• Trigger Guard 1, 2
• Trigger
We are extremely proud of this Armour!
MATERIAL
Printed in PLA, a sustainable and environmentally friendly plastic.
Optional Extras
• Available with or without helmet.
• Now available with Visor + £12
Replacement grinder shield which is flexible and can be cut with scissors.
SIZING
Helmet -This helmet fits most adult female heads. If you believe you have a head larger than the average Uk female of 55.2 cm circumference (measured at the brow), then please add a note to your order to print larger.
Armour -We will contact you by email with all the body measurements needed and print for your personal size.
HOW LONG?
We aim to print and get things shipped out to you within 4 weeks. However depending on volume or print failures it can take up to 6 weeks so please bare with us.
SHIPPING
Will be sent carefully and well packaged in 2 boxes.
UK Shipping £25 - Royal Mail Special Delivery.
Europe Shipping £56 - Royal Mail International Tracked
Worldwide Shipping £64 - Royal Mail International Tracked
US Shipping £72 - Royal Mail International Tracked
LEGAL
• This is not an official licensed product and is considered ‘Fan Art’. The copyright of this product does not belong to the seller.
• Buyers are responsible for any Customs and import taxes
• Due to the custom nature of the work, print and dispatch times may vary and are estimates only.
• Shipping delays can happen. Postage has been affected everywhere by the global pandemic, please understand that we cannot control everything but try our best to get your order to you as fast as possible
