Darth Revan DIY Kit (Knights of the Old Republic II)
Darth Revan DIY Kit (Knights of the Old Republic II)
The enigmatic Revan/Darth Revan given that you can play him as either. Originally seen in the Knights of the Old Republic Videogame, Revan became a fan favourite and one of the most loved characters of all time with extremely complex story arc moving from Jedi to Sith and back again, ultimately being used by both for his power and spurring him onto a quest to discover himself.
Tutorial vid of this exact helmet HERE
The DIY kit can come with the Front Mask Only or the Full helmet.
The front and back parts of the helmet join with 8 x (4mm x 8mm neodymium magnets - not included). The smaller accessories are all separate for easier building and painting.
PLEASE NOTE: This is DIY Helmet kit. The first images are what you can make on your own from this exact kit. The parts will need to be assembled, filled, sanded and painted and the fun is all in the build!
Actual raw 3D Printed parts received are::
• Front Mask
• Rear Helmet
• Large Vents x2
• Small Vents x2
• Front Greeblies x2
We are extremely proud of this helmet!
OPTIONAL EXTRAS
• NOW WITH VISOR INCLUDED!+ £12.00
Replacement grinder shield, flexible material and can be cut with scissors.
SIZING
This helmet fits most adult male heads. If you believe you have a head larger than the average Uk male of 57.2 cm circumference (measured at the brow), then please add a note to your order to print larger. As with all the Phase I iterations the helmet can come in it’s original scale (for heads that fit) and a version with a slightly wider bottom hole and neck collar for larger heads without any noticeable difference.
HOW LONG?
Orders are printed on demand. We usually dispatch within 1-2 weeks. However depending on volume or print failures it can take 1-4 weeks so please bare with us.
SHIPPING
FREE UK SHIPPING - EVRi Standard 2-3 days £0.00
EUR - Royal Mail International Tracked 3-7 days £12.00
USA/CAN - Royal Mail International Tracked 9-10 £24
WORLDWIDE - Royal Mail International Tracked 9-10 £31.00
LEGAL
• This is not an official licensed product and is considered ‘Fan Art’. The copyright of this product does not belong to the seller.
• Buyers are responsible for any Customs and import taxes• Due to the custom nature of the work, print and dispatch times may vary and are estimates only.
• Shipping delays can happen. Postage has been affected everywhere by the global pandemic, please understand that we cannot control everything but try our best to get your order to you as fast as possible.
Darth Revan DIY Kit (Knights of the Old Republic II)
The enigmatic Revan/Darth Revan given that you can play him as either. Originally seen in the Knights of the Old Republic Videogame, Revan became a fan favourite and one of the most loved characters of all time with extremely complex story arc moving from Jedi to Sith and back again, ultimately being used by both for his power and spurring him onto a quest to discover himself.
Tutorial vid of this exact helmet HERE
The DIY kit can come with the Front Mask Only or the Full helmet.
The front and back parts of the helmet join with 8 x (4mm x 8mm neodymium magnets - not included). The smaller accessories are all separate for easier building and painting.
PLEASE NOTE: This is DIY Helmet kit. The first images are what you can make on your own from this exact kit. The parts will need to be assembled, filled, sanded and painted and the fun is all in the build!
Actual raw 3D Printed parts received are::
• Front Mask
• Rear Helmet
• Large Vents x2
• Small Vents x2
• Front Greeblies x2
We are extremely proud of this helmet!
OPTIONAL EXTRAS
• NOW WITH VISOR INCLUDED!+ £12.00
Replacement grinder shield, flexible material and can be cut with scissors.
SIZING
This helmet fits most adult male heads. If you believe you have a head larger than the average Uk male of 57.2 cm circumference (measured at the brow), then please add a note to your order to print larger. As with all the Phase I iterations the helmet can come in it’s original scale (for heads that fit) and a version with a slightly wider bottom hole and neck collar for larger heads without any noticeable difference.
HOW LONG?
Orders are printed on demand. We usually dispatch within 1-2 weeks. However depending on volume or print failures it can take 1-4 weeks so please bare with us.
SHIPPING
FREE UK SHIPPING - EVRi Standard 2-3 days £0.00
EUR - Royal Mail International Tracked 3-7 days £12.00
USA/CAN - Royal Mail International Tracked 9-10 £24
WORLDWIDE - Royal Mail International Tracked 9-10 £31.00
LEGAL
• This is not an official licensed product and is considered ‘Fan Art’. The copyright of this product does not belong to the seller.
• Buyers are responsible for any Customs and import taxes• Due to the custom nature of the work, print and dispatch times may vary and are estimates only.
• Shipping delays can happen. Postage has been affected everywhere by the global pandemic, please understand that we cannot control everything but try our best to get your order to you as fast as possible.
Darth Revan DIY Kit (Knights of the Old Republic II)
The enigmatic Revan/Darth Revan given that you can play him as either. Originally seen in the Knights of the Old Republic Videogame, Revan became a fan favourite and one of the most loved characters of all time with extremely complex story arc moving from Jedi to Sith and back again, ultimately being used by both for his power and spurring him onto a quest to discover himself.
Tutorial vid of this exact helmet HERE
The DIY kit can come with the Front Mask Only or the Full helmet.
The front and back parts of the helmet join with 8 x (4mm x 8mm neodymium magnets - not included). The smaller accessories are all separate for easier building and painting.
PLEASE NOTE: This is DIY Helmet kit. The first images are what you can make on your own from this exact kit. The parts will need to be assembled, filled, sanded and painted and the fun is all in the build!
Actual raw 3D Printed parts received are::
• Front Mask
• Rear Helmet
• Large Vents x2
• Small Vents x2
• Front Greeblies x2
We are extremely proud of this helmet!
OPTIONAL EXTRAS
• NOW WITH VISOR INCLUDED!+ £12.00
Replacement grinder shield, flexible material and can be cut with scissors.
SIZING
This helmet fits most adult male heads. If you believe you have a head larger than the average Uk male of 57.2 cm circumference (measured at the brow), then please add a note to your order to print larger. As with all the Phase I iterations the helmet can come in it’s original scale (for heads that fit) and a version with a slightly wider bottom hole and neck collar for larger heads without any noticeable difference.
HOW LONG?
Orders are printed on demand. We usually dispatch within 1-2 weeks. However depending on volume or print failures it can take 1-4 weeks so please bare with us.
SHIPPING
FREE UK SHIPPING - EVRi Standard 2-3 days £0.00
EUR - Royal Mail International Tracked 3-7 days £12.00
USA/CAN - Royal Mail International Tracked 9-10 £24
WORLDWIDE - Royal Mail International Tracked 9-10 £31.00
LEGAL
• This is not an official licensed product and is considered ‘Fan Art’. The copyright of this product does not belong to the seller.
• Buyers are responsible for any Customs and import taxes• Due to the custom nature of the work, print and dispatch times may vary and are estimates only.
• Shipping delays can happen. Postage has been affected everywhere by the global pandemic, please understand that we cannot control everything but try our best to get your order to you as fast as possible.
