Death Trooper DIY Kit (Rogue One/Andor)
Death Trooper DIY Kit (Rogue One/Andor)
*PLEASE NOTE - This is a DIY Kit, the parts will need to be assembled, filled, sanded smooth and painted and the fun is all in the build!
DESCRIPTION
Death troopers, also known as death soldiers or AWR Troopers, were an elite variant of stormtroopers specialising in stealth, espionage and lethality that served the Galactic Empire. No expense has been spared when designing this helmet so it is not only beautiful and accurate, but ‘build friendly’ with seperate parts to avoid excessive masking between the gloss black and space grey surfaces.
The rebreathers are two parts and hollow to add clear green screens and LED’s with a hollow tunnel to the inside of the helmet to thread the wiring through.
The ‘multi-frequency targeting and acquisition sensor’ or ‘Side Targeter’ is hollow so you can add Green and White LED’s and battery/wiring. It has a compartment door on the inside edge which joins with (5mm x 5mm) neodymium magnets as well as housing for (10mm x 10mm) neodymium magnets which joins the whole thing to the helmet.
Actual 3d printed parts received are:
• Helmet (3 parts)
• Face Plate Inner
• Face Plate Outer Left & Right
• Front Grill
• Nose Grill
• Rebreather Inner Left & Right
• Rebreather Outer Left & Right
• Side Targeter
• Side Targeter Door
You wIll need:
• 8 x (5mm x 5mm) cylindrical neodymium magnets for the side targeter
• 4 x (10mm x 10mm) cylindrical neodymium magnets to join the side targeter (2 x on the inside of the helmet and 2 x inside the side targeter)
3 × (5mm) Green LED’s for the Rebreathers and side targeter
1 x (5mm) White LED for the side targeter
Green Visor Material
We are extremely proud of this Helmet!
SIZING
This helmet fits most adult male heads. If you believe you have a head larger or smaller than the average Uk male of 60cm circumference (measured at the brow), then please add a note to your order for us to scale.
HOW LONG?
1-4 weeks. 3D printing is a slow process and we never rush our printers for the best quality. Thank you for your patience when ordering.
SHIPPING
FREE UK SHIPPING - EVRi Standard 2-3 days £0.00
EUR - Royal Mail International Tracked 3-7 days £12.00
USA/CAN - Royal Mail International Tracked 9-10 £24
WORLDWIDE - Royal Mail International Tracked 9-10 £31.00
LEGAL
• Jedha workshop does not own the copyright to the image used. These are for promotional display purposes only until we build and photograph our own. The copyright belongs to ANOVOS.
• This is not an official licensed product and is considered ‘Fan Art’. The copyright of this product does not belong to the seller.
• Buyers are responsible for any Customs and import taxes
• Due to the custom nature of the work, print and dispatch times may vary and are estimates only.
Death Trooper DIY Kit (Rogue One/Andor)
*PLEASE NOTE - This is a DIY Kit, the parts will need to be assembled, filled, sanded smooth and painted and the fun is all in the build!
DESCRIPTION
Death troopers, also known as death soldiers or AWR Troopers, were an elite variant of stormtroopers specialising in stealth, espionage and lethality that served the Galactic Empire. No expense has been spared when designing this helmet so it is not only beautiful and accurate, but ‘build friendly’ with seperate parts to avoid excessive masking between the gloss black and space grey surfaces.
The rebreathers are two parts and hollow to add clear green screens and LED’s with a hollow tunnel to the inside of the helmet to thread the wiring through.
The ‘multi-frequency targeting and acquisition sensor’ or ‘Side Targeter’ is hollow so you can add Green and White LED’s and battery/wiring. It has a compartment door on the inside edge which joins with (5mm x 5mm) neodymium magnets as well as housing for (10mm x 10mm) neodymium magnets which joins the whole thing to the helmet.
Actual 3d printed parts received are:
• Helmet (3 parts)
• Face Plate Inner
• Face Plate Outer Left & Right
• Front Grill
• Nose Grill
• Rebreather Inner Left & Right
• Rebreather Outer Left & Right
• Side Targeter
• Side Targeter Door
You wIll need:
• 8 x (5mm x 5mm) cylindrical neodymium magnets for the side targeter
• 4 x (10mm x 10mm) cylindrical neodymium magnets to join the side targeter (2 x on the inside of the helmet and 2 x inside the side targeter)
3 × (5mm) Green LED’s for the Rebreathers and side targeter
1 x (5mm) White LED for the side targeter
Green Visor Material
We are extremely proud of this Helmet!
SIZING
This helmet fits most adult male heads. If you believe you have a head larger or smaller than the average Uk male of 60cm circumference (measured at the brow), then please add a note to your order for us to scale.
HOW LONG?
1-4 weeks. 3D printing is a slow process and we never rush our printers for the best quality. Thank you for your patience when ordering.
SHIPPING
FREE UK SHIPPING - EVRi Standard 2-3 days £0.00
EUR - Royal Mail International Tracked 3-7 days £12.00
USA/CAN - Royal Mail International Tracked 9-10 £24
WORLDWIDE - Royal Mail International Tracked 9-10 £31.00
LEGAL
• Jedha workshop does not own the copyright to the image used. These are for promotional display purposes only until we build and photograph our own. The copyright belongs to ANOVOS.
• This is not an official licensed product and is considered ‘Fan Art’. The copyright of this product does not belong to the seller.
• Buyers are responsible for any Customs and import taxes
• Due to the custom nature of the work, print and dispatch times may vary and are estimates only.
Death Trooper DIY Kit (Rogue One/Andor)
*PLEASE NOTE - This is a DIY Kit, the parts will need to be assembled, filled, sanded smooth and painted and the fun is all in the build!
DESCRIPTION
Death troopers, also known as death soldiers or AWR Troopers, were an elite variant of stormtroopers specialising in stealth, espionage and lethality that served the Galactic Empire. No expense has been spared when designing this helmet so it is not only beautiful and accurate, but ‘build friendly’ with seperate parts to avoid excessive masking between the gloss black and space grey surfaces.
The rebreathers are two parts and hollow to add clear green screens and LED’s with a hollow tunnel to the inside of the helmet to thread the wiring through.
The ‘multi-frequency targeting and acquisition sensor’ or ‘Side Targeter’ is hollow so you can add Green and White LED’s and battery/wiring. It has a compartment door on the inside edge which joins with (5mm x 5mm) neodymium magnets as well as housing for (10mm x 10mm) neodymium magnets which joins the whole thing to the helmet.
Actual 3d printed parts received are:
• Helmet (3 parts)
• Face Plate Inner
• Face Plate Outer Left & Right
• Front Grill
• Nose Grill
• Rebreather Inner Left & Right
• Rebreather Outer Left & Right
• Side Targeter
• Side Targeter Door
You wIll need:
• 8 x (5mm x 5mm) cylindrical neodymium magnets for the side targeter
• 4 x (10mm x 10mm) cylindrical neodymium magnets to join the side targeter (2 x on the inside of the helmet and 2 x inside the side targeter)
3 × (5mm) Green LED’s for the Rebreathers and side targeter
1 x (5mm) White LED for the side targeter
Green Visor Material
We are extremely proud of this Helmet!
SIZING
This helmet fits most adult male heads. If you believe you have a head larger or smaller than the average Uk male of 60cm circumference (measured at the brow), then please add a note to your order for us to scale.
HOW LONG?
1-4 weeks. 3D printing is a slow process and we never rush our printers for the best quality. Thank you for your patience when ordering.
SHIPPING
FREE UK SHIPPING - EVRi Standard 2-3 days £0.00
EUR - Royal Mail International Tracked 3-7 days £12.00
USA/CAN - Royal Mail International Tracked 9-10 £24
WORLDWIDE - Royal Mail International Tracked 9-10 £31.00
LEGAL
• Jedha workshop does not own the copyright to the image used. These are for promotional display purposes only until we build and photograph our own. The copyright belongs to ANOVOS.
• This is not an official licensed product and is considered ‘Fan Art’. The copyright of this product does not belong to the seller.
• Buyers are responsible for any Customs and import taxes
• Due to the custom nature of the work, print and dispatch times may vary and are estimates only.
