Qimir The Stranger V2 Full Armour DIY Kit (The Acolyte)
Qimir The Stranger V2 Full Armour DIY Kit (The Acolyte)
V2 Now Available!
*PLEASE NOTE- This is a DIY kit. The parts will need sanding, filling and painting and the fun is all in the build!
The enigmatic Qimir from The Acolyte series. Here we have all his hard parts needed for his cosplay; The V2 Helmet, V2 Gauntlet and ‘X’ Back brace. The Gauntlet comes in 2 main parts ‘clam shell’ style and joins with (4mm x 8mm) cylindrical neodymium magnets and the seam line is hidden along the textures of the gauntlet itself.
V2 Now updated with 10 billion improvements! For a full list of changes please scroll to the bottom of the page.
The mysterious and bad ass sith lord trained by Darth Plagueis himself; Qimir, The Stranger or simply ‘The Master’ from The Acolyte series.
To say we went to great lengths to design this helmet accurately is an understatement. It has been more than a year long project from the first draft to the new V2. Every detail has been meticulously researched and modelled to be as accurate as possible to the show helmet.
All parts are seperate for easier building and painting and as with all our helmets, accuracy is our obsession.
Actual Raw 3d printed parts received are:
Helmet
• Helmet Dome
• Helmet Face
• Helmet Jaw
• Chin Accessory
•Greeblie
• Teeth (x6 parts)
Gauntlet
• Gauntlet (2 Parts)
• Metal Greeblies (2 parts)
• ’X’ Brace
We are extremely proud of these models!
MATERIAL
Printed in PLA, a sustainable and environmentally friendly plastic.
SIZING
This helmet fits most adult male heads. If you believe you have a head larger than the average Uk male of 57.2 cm circumference (measured at the brow), then please add a note to your order to print larger.
HOW LONG?
We aim to print and get things shipped out to you within 4 weeks. However depending on volume or print failures it can take up to 6 weeks so please bare with us.
SHIPPING
FREE UK SHIPPING - EVRi Standard 2-3 days £0.00
EUR - Royal Mail International Tracked 3-7 days £12.00
USA/CAN - Royal Mail International Tracked 9-10 £24
WORLDWIDE - Royal Mail International Tracked 9-10 £31.00
V2 Helmet Changes
We reshaped the whole shape of the helmet to give an accurate profile, completely re-designed the teeth from scratch making them hollow with vertical fixing points giving more room in the helmet, filled in the top gums, raised up the mouth, reshaped the lower jaw, reduced the jaw width, made the jaw cut outs accurately shaped. Flared out and extended the back shroud and added accurate crinkling. Stretched out and increased the thickness of the upper rear hood. Re-designed the cheek greeblie. Extended and re-mapped the entire weld lines across the whole helmet and chin and added realistic weld texturing.
We added about 4,000,000,000% more accurate battle damage and scratches over the whole helmet. Re-textured the whole helmet. Extended the vertical scratch lines over the top and added deep scratch textures. Extra damage to the eye, added more detail to the chin accessory. Ditched the magnet idea and added male/female glue points to the jaw. Added location points to the dome of the helmet and - so you can better fill, sand and paint the central teeth, we kept the upper and lower central teeth seperate and added a bracket that sits behind them to hold the jaw and upper helmet together without negating on space.
LEGAL
• This is not an official licensed product and is considered ‘Fan Art’. The copyright of this product does not belong to the seller.
• Buyers are responsible for any Customs and import taxes
• Due to the custom nature of the work, print and dispatch times may vary and are estimates only.
• Shipping delays can happen. Postage has been affected everywhere by the global pandemic, please understand that we cannot control everything but try our best to get your order to you as fast as possible
Qimir The Stranger V2 Full Armour DIY Kit (The Acolyte)
V2 Now Available!
*PLEASE NOTE- This is a DIY kit. The parts will need sanding, filling and painting and the fun is all in the build!
The enigmatic Qimir from The Acolyte series. Here we have all his hard parts needed for his cosplay; The V2 Helmet, V2 Gauntlet and ‘X’ Back brace. The Gauntlet comes in 2 main parts ‘clam shell’ style and joins with (4mm x 8mm) cylindrical neodymium magnets and the seam line is hidden along the textures of the gauntlet itself.
V2 Now updated with 10 billion improvements! For a full list of changes please scroll to the bottom of the page.
The mysterious and bad ass sith lord trained by Darth Plagueis himself; Qimir, The Stranger or simply ‘The Master’ from The Acolyte series.
To say we went to great lengths to design this helmet accurately is an understatement. It has been more than a year long project from the first draft to the new V2. Every detail has been meticulously researched and modelled to be as accurate as possible to the show helmet.
All parts are seperate for easier building and painting and as with all our helmets, accuracy is our obsession.
Actual Raw 3d printed parts received are:
Helmet
• Helmet Dome
• Helmet Face
• Helmet Jaw
• Chin Accessory
•Greeblie
• Teeth (x6 parts)
Gauntlet
• Gauntlet (2 Parts)
• Metal Greeblies (2 parts)
• ’X’ Brace
We are extremely proud of these models!
MATERIAL
Printed in PLA, a sustainable and environmentally friendly plastic.
SIZING
This helmet fits most adult male heads. If you believe you have a head larger than the average Uk male of 57.2 cm circumference (measured at the brow), then please add a note to your order to print larger.
HOW LONG?
We aim to print and get things shipped out to you within 4 weeks. However depending on volume or print failures it can take up to 6 weeks so please bare with us.
SHIPPING
FREE UK SHIPPING - EVRi Standard 2-3 days £0.00
EUR - Royal Mail International Tracked 3-7 days £12.00
USA/CAN - Royal Mail International Tracked 9-10 £24
WORLDWIDE - Royal Mail International Tracked 9-10 £31.00
V2 Helmet Changes
We reshaped the whole shape of the helmet to give an accurate profile, completely re-designed the teeth from scratch making them hollow with vertical fixing points giving more room in the helmet, filled in the top gums, raised up the mouth, reshaped the lower jaw, reduced the jaw width, made the jaw cut outs accurately shaped. Flared out and extended the back shroud and added accurate crinkling. Stretched out and increased the thickness of the upper rear hood. Re-designed the cheek greeblie. Extended and re-mapped the entire weld lines across the whole helmet and chin and added realistic weld texturing.
We added about 4,000,000,000% more accurate battle damage and scratches over the whole helmet. Re-textured the whole helmet. Extended the vertical scratch lines over the top and added deep scratch textures. Extra damage to the eye, added more detail to the chin accessory. Ditched the magnet idea and added male/female glue points to the jaw. Added location points to the dome of the helmet and - so you can better fill, sand and paint the central teeth, we kept the upper and lower central teeth seperate and added a bracket that sits behind them to hold the jaw and upper helmet together without negating on space.
LEGAL
• This is not an official licensed product and is considered ‘Fan Art’. The copyright of this product does not belong to the seller.
• Buyers are responsible for any Customs and import taxes
• Due to the custom nature of the work, print and dispatch times may vary and are estimates only.
• Shipping delays can happen. Postage has been affected everywhere by the global pandemic, please understand that we cannot control everything but try our best to get your order to you as fast as possible
Qimir The Stranger V2 Full Armour DIY Kit (The Acolyte)
V2 Now Available!
*PLEASE NOTE- This is a DIY kit. The parts will need sanding, filling and painting and the fun is all in the build!
The enigmatic Qimir from The Acolyte series. Here we have all his hard parts needed for his cosplay; The V2 Helmet, V2 Gauntlet and ‘X’ Back brace. The Gauntlet comes in 2 main parts ‘clam shell’ style and joins with (4mm x 8mm) cylindrical neodymium magnets and the seam line is hidden along the textures of the gauntlet itself.
V2 Now updated with 10 billion improvements! For a full list of changes please scroll to the bottom of the page.
The mysterious and bad ass sith lord trained by Darth Plagueis himself; Qimir, The Stranger or simply ‘The Master’ from The Acolyte series.
To say we went to great lengths to design this helmet accurately is an understatement. It has been more than a year long project from the first draft to the new V2. Every detail has been meticulously researched and modelled to be as accurate as possible to the show helmet.
All parts are seperate for easier building and painting and as with all our helmets, accuracy is our obsession.
Actual Raw 3d printed parts received are:
Helmet
• Helmet Dome
• Helmet Face
• Helmet Jaw
• Chin Accessory
•Greeblie
• Teeth (x6 parts)
Gauntlet
• Gauntlet (2 Parts)
• Metal Greeblies (2 parts)
• ’X’ Brace
We are extremely proud of these models!
MATERIAL
Printed in PLA, a sustainable and environmentally friendly plastic.
SIZING
This helmet fits most adult male heads. If you believe you have a head larger than the average Uk male of 57.2 cm circumference (measured at the brow), then please add a note to your order to print larger.
HOW LONG?
We aim to print and get things shipped out to you within 4 weeks. However depending on volume or print failures it can take up to 6 weeks so please bare with us.
SHIPPING
FREE UK SHIPPING - EVRi Standard 2-3 days £0.00
EUR - Royal Mail International Tracked 3-7 days £12.00
USA/CAN - Royal Mail International Tracked 9-10 £24
WORLDWIDE - Royal Mail International Tracked 9-10 £31.00
V2 Helmet Changes
We reshaped the whole shape of the helmet to give an accurate profile, completely re-designed the teeth from scratch making them hollow with vertical fixing points giving more room in the helmet, filled in the top gums, raised up the mouth, reshaped the lower jaw, reduced the jaw width, made the jaw cut outs accurately shaped. Flared out and extended the back shroud and added accurate crinkling. Stretched out and increased the thickness of the upper rear hood. Re-designed the cheek greeblie. Extended and re-mapped the entire weld lines across the whole helmet and chin and added realistic weld texturing.
We added about 4,000,000,000% more accurate battle damage and scratches over the whole helmet. Re-textured the whole helmet. Extended the vertical scratch lines over the top and added deep scratch textures. Extra damage to the eye, added more detail to the chin accessory. Ditched the magnet idea and added male/female glue points to the jaw. Added location points to the dome of the helmet and - so you can better fill, sand and paint the central teeth, we kept the upper and lower central teeth seperate and added a bracket that sits behind them to hold the jaw and upper helmet together without negating on space.
LEGAL
• This is not an official licensed product and is considered ‘Fan Art’. The copyright of this product does not belong to the seller.
• Buyers are responsible for any Customs and import taxes
• Due to the custom nature of the work, print and dispatch times may vary and are estimates only.
• Shipping delays can happen. Postage has been affected everywhere by the global pandemic, please understand that we cannot control everything but try our best to get your order to you as fast as possible
