Clone X (Sniper X/Clone Assassin) DIY Helmet Kit (The Bad Batch)
Clone X, also known as Sniper X was a bounty hunter, mercenary and commando seen in Season 2 of The Bad Batch and was surprisingly revealed to be a Clone Assassin deployed by Vice Admiral Rampart to eliminate anyone who intended to reveal the truth of the destruction the Kaminoan cities, covered up by the Imperial Senate.
This elegant stealthy helmet as been lovingly crafted to be as accurate as possible to the show.
All parts are all seperate for easier printing, building and painting.
The main helmet is in 3 parts with the jaw being removable and joined by 4 x (4mm x 8mm neodymium cylindrical magnets) and once on the mask is removable as in the show and joined by 5 x (4mm x 8mm neodymium cylindrical magnets).
The Ear section has been designed with a cutout to run wiring from LED’s to a battery pack, with a spacious inner ear section for the lights, a middle piece printed in clear PLA/resin and the outer grill.
The helmet will come in the following raw 3D printed parts:
• Helmet Back
• Helmet jaw
• Helmet Mask
• Ear Glass (x2)
• Ear Inner (x2)
• Ear Outer (x2)
• Greeblies (x2)
Pre Order Now to get yours first!
SIZING
This helmet fits most adult male heads. If you believe you have a head larger than the average Uk male of 57.2 cm circumference (measured at the brow), then please add a note to your order to print larger. As with all the Phase I iterations the helmet can come in it’s original scale (for heads that fit) and a version with a slightly wider bottom hole and neck collar for larger heads without any noticeable difference.
HOW LONG?
The design process takes aprox 1-2 weeks. And with new designs you get priority printing so once we have approved the final design, printing will be approx 1 week turnaround. However depending on volume or print failures it can take up to 2 weeks so please bare with us.
SHIPPING
UK Shipping £12.50 - Royal Mail Special Delivery.
Worldwide shipping available, cost is calculated at checkout. Sent well packaged.
LEGAL
• This is not an official licensed product and is considered ‘Fan Art’. The copyright of this product does not belong to the seller.
• As this is a hand made piece there will be small irregularities.
• Buyers are responsible for any Customs and import taxes
• Due to the custom nature of the work, print and dispatch times may vary and are estimates only.
• Shipping delays can happen. Postage has been affected everywhere by the global pandemic, please understand that we cannot control everything but try our best to get your order to you as fast as possible
Clone X, also known as Sniper X was a bounty hunter, mercenary and commando seen in Season 2 of The Bad Batch and was surprisingly revealed to be a Clone Assassin deployed by Vice Admiral Rampart to eliminate anyone who intended to reveal the truth of the destruction the Kaminoan cities, covered up by the Imperial Senate.
This elegant stealthy helmet as been lovingly crafted to be as accurate as possible to the show.
All parts are all seperate for easier printing, building and painting.
The main helmet is in 3 parts with the jaw being removable and joined by 4 x (4mm x 8mm neodymium cylindrical magnets) and once on the mask is removable as in the show and joined by 5 x (4mm x 8mm neodymium cylindrical magnets).
The Ear section has been designed with a cutout to run wiring from LED’s to a battery pack, with a spacious inner ear section for the lights, a middle piece printed in clear PLA/resin and the outer grill.
The helmet will come in the following raw 3D printed parts:
• Helmet Back
• Helmet jaw
• Helmet Mask
• Ear Glass (x2)
• Ear Inner (x2)
• Ear Outer (x2)
• Greeblies (x2)
Pre Order Now to get yours first!
SIZING
This helmet fits most adult male heads. If you believe you have a head larger than the average Uk male of 57.2 cm circumference (measured at the brow), then please add a note to your order to print larger. As with all the Phase I iterations the helmet can come in it’s original scale (for heads that fit) and a version with a slightly wider bottom hole and neck collar for larger heads without any noticeable difference.
HOW LONG?
The design process takes aprox 1-2 weeks. And with new designs you get priority printing so once we have approved the final design, printing will be approx 1 week turnaround. However depending on volume or print failures it can take up to 2 weeks so please bare with us.
SHIPPING
UK Shipping £12.50 - Royal Mail Special Delivery.
Worldwide shipping available, cost is calculated at checkout. Sent well packaged.
LEGAL
• This is not an official licensed product and is considered ‘Fan Art’. The copyright of this product does not belong to the seller.
• As this is a hand made piece there will be small irregularities.
• Buyers are responsible for any Customs and import taxes
• Due to the custom nature of the work, print and dispatch times may vary and are estimates only.
• Shipping delays can happen. Postage has been affected everywhere by the global pandemic, please understand that we cannot control everything but try our best to get your order to you as fast as possible
Clone X, also known as Sniper X was a bounty hunter, mercenary and commando seen in Season 2 of The Bad Batch and was surprisingly revealed to be a Clone Assassin deployed by Vice Admiral Rampart to eliminate anyone who intended to reveal the truth of the destruction the Kaminoan cities, covered up by the Imperial Senate.
This elegant stealthy helmet as been lovingly crafted to be as accurate as possible to the show.
All parts are all seperate for easier printing, building and painting.
The main helmet is in 3 parts with the jaw being removable and joined by 4 x (4mm x 8mm neodymium cylindrical magnets) and once on the mask is removable as in the show and joined by 5 x (4mm x 8mm neodymium cylindrical magnets).
The Ear section has been designed with a cutout to run wiring from LED’s to a battery pack, with a spacious inner ear section for the lights, a middle piece printed in clear PLA/resin and the outer grill.
The helmet will come in the following raw 3D printed parts:
• Helmet Back
• Helmet jaw
• Helmet Mask
• Ear Glass (x2)
• Ear Inner (x2)
• Ear Outer (x2)
• Greeblies (x2)
Pre Order Now to get yours first!
SIZING
This helmet fits most adult male heads. If you believe you have a head larger than the average Uk male of 57.2 cm circumference (measured at the brow), then please add a note to your order to print larger. As with all the Phase I iterations the helmet can come in it’s original scale (for heads that fit) and a version with a slightly wider bottom hole and neck collar for larger heads without any noticeable difference.
HOW LONG?
The design process takes aprox 1-2 weeks. And with new designs you get priority printing so once we have approved the final design, printing will be approx 1 week turnaround. However depending on volume or print failures it can take up to 2 weeks so please bare with us.
SHIPPING
UK Shipping £12.50 - Royal Mail Special Delivery.
Worldwide shipping available, cost is calculated at checkout. Sent well packaged.
LEGAL
• This is not an official licensed product and is considered ‘Fan Art’. The copyright of this product does not belong to the seller.
• As this is a hand made piece there will be small irregularities.
• Buyers are responsible for any Customs and import taxes
• Due to the custom nature of the work, print and dispatch times may vary and are estimates only.
• Shipping delays can happen. Postage has been affected everywhere by the global pandemic, please understand that we cannot control everything but try our best to get your order to you as fast as possible
