C3PO Helmet - DIY Kit
He’s fluent in over six million forms of communication, he’s gold, he’s camp as christmas, he’s annoying, and we absolutely love him for all of it!
When designing this helmet we went straight to the source - the movies, the promo shots of the actual prop, every single line and contour has been considered.
He’s a 2 part helmet, joining with a catch at the top and then glue two M4 bolts into the actual droid neck bolts and tighten from there. He’s fully wearable and he also comes with a neck piece. The neck is not wearable and is more intended to prop him up for display purposes.
All parts are separate for efficient building including the eye set up. Lenses are printed in clear PLA and you can add your own lights.
*Please note - This is a DIY kit. The parts will need to be assembled, filled, sanded and painted and the fun really is all in the build!
Actual items received are the following 3D Printed parts:
• Antenna
• Back vent
• Eye grid x2
• Eye lens x2
• Eye Socket x2
• Eye Tube x2
• Helmet Back
• Helmet front
• Neck Bolt x2
• Neck
We are very proud of this helmet!
COLOURS
We always try our best to print parts in their respective colours however, depending on filament demand, some pieces may differ in colour. As the helmet will be prepped and painted however this doesn't matter.
SIZING
This helmet fits most adult male heads. If you believe you have a head larger than the average Uk male of 57.2 cm circumference (measured at the brow), then please add a note to your order or message us on Facebook and we can make arrangements to print larger.
HOW LONG?
Orders are printed on demand. We usually dispatch within 1-4 weeks. However depending on volume or print failures it can take up to 6 weeks so please bare with us.
SHIPPING
FREE UK SHIPPING - EVRi Standard 2-3 days £0.00
EUR - Royal Mail International Tracked 3-7 days £12.00
USA/CAN - Royal Mail International Tracked 9-10 £24
WORLDWIDE - Royal Mail International Tracked 9-10 £31.00
LEGAL
• This is not an official licensed product and is considered ‘Fan Art’. The copyright of this product does not belong to the seller.
• Buyers are responsible for any Customs and import taxes
• Due to the custom nature of the work, print and dispatch times may vary and are estimates only.
• Shipping delays can happen. Postage has been affected everywhere by the global pandemic, please understand that we cannot control everything but try our best to get your order to you as fast as possible
He’s fluent in over six million forms of communication, he’s gold, he’s camp as christmas, he’s annoying, and we absolutely love him for all of it!
When designing this helmet we went straight to the source - the movies, the promo shots of the actual prop, every single line and contour has been considered.
He’s a 2 part helmet, joining with a catch at the top and then glue two M4 bolts into the actual droid neck bolts and tighten from there. He’s fully wearable and he also comes with a neck piece. The neck is not wearable and is more intended to prop him up for display purposes.
All parts are separate for efficient building including the eye set up. Lenses are printed in clear PLA and you can add your own lights.
*Please note - This is a DIY kit. The parts will need to be assembled, filled, sanded and painted and the fun really is all in the build!
Actual items received are the following 3D Printed parts:
• Antenna
• Back vent
• Eye grid x2
• Eye lens x2
• Eye Socket x2
• Eye Tube x2
• Helmet Back
• Helmet front
• Neck Bolt x2
• Neck
We are very proud of this helmet!
COLOURS
We always try our best to print parts in their respective colours however, depending on filament demand, some pieces may differ in colour. As the helmet will be prepped and painted however this doesn't matter.
SIZING
This helmet fits most adult male heads. If you believe you have a head larger than the average Uk male of 57.2 cm circumference (measured at the brow), then please add a note to your order or message us on Facebook and we can make arrangements to print larger.
HOW LONG?
Orders are printed on demand. We usually dispatch within 1-4 weeks. However depending on volume or print failures it can take up to 6 weeks so please bare with us.
SHIPPING
FREE UK SHIPPING - EVRi Standard 2-3 days £0.00
EUR - Royal Mail International Tracked 3-7 days £12.00
USA/CAN - Royal Mail International Tracked 9-10 £24
WORLDWIDE - Royal Mail International Tracked 9-10 £31.00
LEGAL
• This is not an official licensed product and is considered ‘Fan Art’. The copyright of this product does not belong to the seller.
• Buyers are responsible for any Customs and import taxes
• Due to the custom nature of the work, print and dispatch times may vary and are estimates only.
• Shipping delays can happen. Postage has been affected everywhere by the global pandemic, please understand that we cannot control everything but try our best to get your order to you as fast as possible
He’s fluent in over six million forms of communication, he’s gold, he’s camp as christmas, he’s annoying, and we absolutely love him for all of it!
When designing this helmet we went straight to the source - the movies, the promo shots of the actual prop, every single line and contour has been considered.
He’s a 2 part helmet, joining with a catch at the top and then glue two M4 bolts into the actual droid neck bolts and tighten from there. He’s fully wearable and he also comes with a neck piece. The neck is not wearable and is more intended to prop him up for display purposes.
All parts are separate for efficient building including the eye set up. Lenses are printed in clear PLA and you can add your own lights.
*Please note - This is a DIY kit. The parts will need to be assembled, filled, sanded and painted and the fun really is all in the build!
Actual items received are the following 3D Printed parts:
• Antenna
• Back vent
• Eye grid x2
• Eye lens x2
• Eye Socket x2
• Eye Tube x2
• Helmet Back
• Helmet front
• Neck Bolt x2
• Neck
We are very proud of this helmet!
COLOURS
We always try our best to print parts in their respective colours however, depending on filament demand, some pieces may differ in colour. As the helmet will be prepped and painted however this doesn't matter.
SIZING
This helmet fits most adult male heads. If you believe you have a head larger than the average Uk male of 57.2 cm circumference (measured at the brow), then please add a note to your order or message us on Facebook and we can make arrangements to print larger.
HOW LONG?
Orders are printed on demand. We usually dispatch within 1-4 weeks. However depending on volume or print failures it can take up to 6 weeks so please bare with us.
SHIPPING
FREE UK SHIPPING - EVRi Standard 2-3 days £0.00
EUR - Royal Mail International Tracked 3-7 days £12.00
USA/CAN - Royal Mail International Tracked 9-10 £24
WORLDWIDE - Royal Mail International Tracked 9-10 £31.00
LEGAL
• This is not an official licensed product and is considered ‘Fan Art’. The copyright of this product does not belong to the seller.
• Buyers are responsible for any Customs and import taxes
• Due to the custom nature of the work, print and dispatch times may vary and are estimates only.
• Shipping delays can happen. Postage has been affected everywhere by the global pandemic, please understand that we cannot control everything but try our best to get your order to you as fast as possible
