Wampa Creature Mask DIY Kit (The Empire Strikes Back)
*Please note - This is a raw 3D Printed DIY kit. The first images are what you can make on your own from this exact kit. The parts will need to be glued, filled, sanded, primed, painted and dressed in fur and the fun is all in the build!
"For the very brave among you who still want to venture out onto the ice planet, I recommend taking a look over your shoulder every few meters to be on the safe side. If you feel like you're being followed, it's usually a hungry wampa!"
Wampas, or wampa ice creatures, were a carnivorous, semi-sentient white-furred primitive species of mammal which dwelled on the snow-clad planet Hoth. Standing at a height of 2.5 to 3 meters and with an average mass of 150 kilograms, the wampa was one of Hoth's top carnivorous predators.
We have meticulously modelled the base helmet after the original screen used prop to make the features as accurate as possible.
The jaw is fully articulated, held with M4 nuts/bolts and elastic bands to keep it in the closed position. This expands open when the wearer opens their mouth.
All exposed areas are separate to print in higher detail.
The eyeballs come with a see-through version as well as solid in case you want to vacuum form some bubble lenses.
Fur not included.
OPTIONS
TWO SIZED VERSIONS
• The ‘on Screen’ version measures approx 36cm tall (15”) and is fully wearable.
• The ‘In Universe’ version of the Wampa is much bigger with its head measuring approx 72cm tall (28”) and due to the large size is intended more for display.
All parts are seperate for easier building and painting and as with all our helmets, accuracy is our obsession.
Actual items received are the following raw 3D Printed parts:
Helmet
• Main Helmet
• Horns Left & Right
Ears Left & Right
• Face
• Jaw
• Eyes - See through and Solid x2
You will need:
• M4 nuts/bolts, washers x 2
• Elastic bands
• Fur
SIZING
This helmet fits most adult male heads. If you believe you have a head larger than the average Uk male of 60 cm circumference (measured at the brow), then please add a note to your order to print larger.
HOW LONG?
2- 6 weeks.
SHIPPING
FREE UK SHIPPING - EVRi Standard 2-3 days £0.00
EUR - Royal Mail International Tracked 3-7 days £12.00
USA/CAN - Royal Mail International Tracked 9-10 £24
WORLDWIDE - Royal Mail International Tracked 9-10 £31.00
LEGAL
• Jedha workshop does not own the copyright to the image used. These are for promotional display purposes only until we build and photograph our own. The copyright belongs to ANOVOS.
• This is not an official licensed product and is considered ‘Fan Art’. The copyright of this product does not belong to the seller.
• Buyers are responsible for any Customs and import taxes
• Due to the custom nature of the work, print and dispatch times may vary and are estimates only.
Wampa Creature Mask DIY Kit (The Empire Strikes Back)
*Please note - This is a raw 3D Printed DIY kit. The first images are what you can make on your own from this exact kit. The parts will need to be glued, filled, sanded, primed, painted and dressed in fur and the fun is all in the build!
"For the very brave among you who still want to venture out onto the ice planet, I recommend taking a look over your shoulder every few meters to be on the safe side. If you feel like you're being followed, it's usually a hungry wampa!"
Wampas, or wampa ice creatures, were a carnivorous, semi-sentient white-furred primitive species of mammal which dwelled on the snow-clad planet Hoth. Standing at a height of 2.5 to 3 meters and with an average mass of 150 kilograms, the wampa was one of Hoth's top carnivorous predators.
We have meticulously modelled the base helmet after the original screen used prop to make the features as accurate as possible.
The jaw is fully articulated, held with M4 nuts/bolts and elastic bands to keep it in the closed position. This expands open when the wearer opens their mouth.
All exposed areas are separate to print in higher detail.
The eyeballs come with a see-through version as well as solid in case you want to vacuum form some bubble lenses.
Fur not included.
OPTIONS
TWO SIZED VERSIONS
• The ‘on Screen’ version measures approx 36cm tall (15”) and is fully wearable.
• The ‘In Universe’ version of the Wampa is much bigger with its head measuring approx 72cm tall (28”) and due to the large size is intended more for display.
All parts are seperate for easier building and painting and as with all our helmets, accuracy is our obsession.
Actual items received are the following raw 3D Printed parts:
Helmet
• Main Helmet
• Horns Left & Right
Ears Left & Right
• Face
• Jaw
• Eyes - See through and Solid x2
You will need:
• M4 nuts/bolts, washers x 2
• Elastic bands
• Fur
SIZING
This helmet fits most adult male heads. If you believe you have a head larger than the average Uk male of 60 cm circumference (measured at the brow), then please add a note to your order to print larger.
HOW LONG?
2- 6 weeks.
SHIPPING
FREE UK SHIPPING - EVRi Standard 2-3 days £0.00
EUR - Royal Mail International Tracked 3-7 days £12.00
USA/CAN - Royal Mail International Tracked 9-10 £24
WORLDWIDE - Royal Mail International Tracked 9-10 £31.00
LEGAL
• Jedha workshop does not own the copyright to the image used. These are for promotional display purposes only until we build and photograph our own. The copyright belongs to ANOVOS.
• This is not an official licensed product and is considered ‘Fan Art’. The copyright of this product does not belong to the seller.
• Buyers are responsible for any Customs and import taxes
• Due to the custom nature of the work, print and dispatch times may vary and are estimates only.
Image 1 of 37
Image 2 of 37
Image 3 of 37
Image 4 of 37
Image 5 of 37
Image 6 of 37
Image 7 of 37
Image 8 of 37
Image 9 of 37
Image 10 of 37
Image 11 of 37
Image 12 of 37
Image 13 of 37
Image 14 of 37
Image 15 of 37
Image 16 of 37
Image 17 of 37
Image 18 of 37
Image 19 of 37
