Candyman Open Chest Guts 3D Print Files Prosthetic (Candyman 1992)
*PLEASE NOTE - These are 3D Print files, not a physical prop.
"Be my victim"
Technically, to cosplay as Candyman; you could just print our Bloody Stump Hook and wear a big coat. But why do that when you can have his entire CHEST GUTS? This prop has been meticulously modelled as a high-detail recreation of the actual screen used prosthetic worn by Tony Todd in Candyman (1992).
We have hollowed out the interior side as much as possible for comfort whilst not disturbing the detail of the front and it still be 3d printable.
At 100% scale, the whole chest piece measure 480mm tall x 344mm wide and is roughly 25mm deep at it’s thinnest point and 125mm deep at it’s thickest. We have separated it into smaller printable chunks of either two halves (upper and lower) or four quadrants with a joining biscuit.
Add heavy duty velcro to the inside or supporting straps and join with E6000 glue or press studs.
The only question that remains is: Do you dare say his name five times?
The chest piece is highly accurate to Candyman however, being standard human anatomy, you could also of course use it as a zombie.
Included in these files are:
• Chest Guts (Full)
• Chest Guts (2 Halves)
• Chest Guts (4 Parts)
• Joining Biscuit
We are extremely proud of this prop!
• Need a Candyman Bloody Stump Hook?
• Candyman Bumble Bee?
• Or how about the Full Candyman Cosplay kit?
Please only use for personal printing.
If you print or build regularly or own a shop, joining the workshop Patreon makes everything easier!
Patreon.com/jedhaworkshop
License Type: Personal Use
This purchase grants you a personal use license for the included 3D print files.
You may:
• 3D print the files for personal use
• Build, display, and enjoy the finished prop
Restrictions
The following are not permitted:
• Redistribution or sharing of the STL files in any form
• Resale of the digital files
• Modification of the files for resale or redistribution.
• Selling 3D printed kits or finished props made from these files
• Casting or vacuum forming for commercial reproduction.
Legal Notice
These models are fan-made creations inspired by existing fictional universes and are not official licensed products.
All designs are original digital works created by Jedha Workshop..
If you’d like access to future models, early releases, commercial rights and the workshop community, you can join the Jedha Workshop Patreon here:
Patreon.com/jedhaworkshop
Candyman Open Chest Guts 3D Print Files Prosthetic (Candyman 1992)
*PLEASE NOTE - These are 3D Print files, not a physical prop.
"Be my victim"
Technically, to cosplay as Candyman; you could just print our Bloody Stump Hook and wear a big coat. But why do that when you can have his entire CHEST GUTS? This prop has been meticulously modelled as a high-detail recreation of the actual screen used prosthetic worn by Tony Todd in Candyman (1992).
We have hollowed out the interior side as much as possible for comfort whilst not disturbing the detail of the front and it still be 3d printable.
At 100% scale, the whole chest piece measure 480mm tall x 344mm wide and is roughly 25mm deep at it’s thinnest point and 125mm deep at it’s thickest. We have separated it into smaller printable chunks of either two halves (upper and lower) or four quadrants with a joining biscuit.
Add heavy duty velcro to the inside or supporting straps and join with E6000 glue or press studs.
The only question that remains is: Do you dare say his name five times?
The chest piece is highly accurate to Candyman however, being standard human anatomy, you could also of course use it as a zombie.
Included in these files are:
• Chest Guts (Full)
• Chest Guts (2 Halves)
• Chest Guts (4 Parts)
• Joining Biscuit
We are extremely proud of this prop!
• Need a Candyman Bloody Stump Hook?
• Candyman Bumble Bee?
• Or how about the Full Candyman Cosplay kit?
Please only use for personal printing.
If you print or build regularly or own a shop, joining the workshop Patreon makes everything easier!
Patreon.com/jedhaworkshop
License Type: Personal Use
This purchase grants you a personal use license for the included 3D print files.
You may:
• 3D print the files for personal use
• Build, display, and enjoy the finished prop
Restrictions
The following are not permitted:
• Redistribution or sharing of the STL files in any form
• Resale of the digital files
• Modification of the files for resale or redistribution.
• Selling 3D printed kits or finished props made from these files
• Casting or vacuum forming for commercial reproduction.
Legal Notice
These models are fan-made creations inspired by existing fictional universes and are not official licensed products.
All designs are original digital works created by Jedha Workshop..
If you’d like access to future models, early releases, commercial rights and the workshop community, you can join the Jedha Workshop Patreon here:
Patreon.com/jedhaworkshop
Image 1 of 19
Image 2 of 19
Image 3 of 19
Image 4 of 19
Image 5 of 19
Image 6 of 19
Image 7 of 19
Image 8 of 19
Image 9 of 19
Image 10 of 19
Image 11 of 19
Image 12 of 19
Image 13 of 19
Image 14 of 19
Image 15 of 19
Image 16 of 19
Image 17 of 19
Image 18 of 19
Image 19 of 19
